Partager via

Using Netsh

  • Article

Netsh is a command-line scripting utility that allows you to, either locally or remotely, display or modify the network configuration of a computer that is currently running. Netsh also provides a scripting feature that allows you to run a group of commands in batch mode against a specified computer. Netsh can also save a configuration script in a text file for archival purposes or to help you configure other servers.

Netsh contexts

Netsh interacts with other operating system components using dynamic-link library (DLL) files. Each Netsh helper DLL provides an extensive set of features called a context, which is a group of commands specific to a networking component. These contexts extend the functionality of netsh by providing configuration and monitoring support for one or more services, utilities, or protocols. For example, Dhcpmon.dll provides netsh the context and set of commands necessary to configure and manage DHCP servers.

To run a netsh command, you must start netsh from the Cmd.exe prompt and change to the context that contains the command you want to use. The contexts that are available to you depend on which networking components you have installed. For example, if you type dhcp at the Netsh command prompt, you change to the DHCP context, but if you do not have DHCP installed the following message appears:

The following command was not found: dhcp.

For more information about Netsh contexts, see the following topics:

Using multiple contexts

A context can exist within a context. For example, within the Routing context, you can change to the IP and IPX subcontexts.

To display a list of commands and subcontexts that you can use within a context, at the netsh prompt, type the context name, and then type either /? or help. For example, to display a list of subcontexts and commands that you can use in the Routing context, at the netsh prompt (that is, netsh>), type either of the following:

routing /?

routing help

To perform tasks in another context without changing from your current context, type the context path of the command you want to use at the netsh prompt. For example, to add the Local Area Connection interface in the IGMP context without changing to the IGMP context, at the netsh prompt, type:

routing ip igmp add interface "Local Area Connection" startupqueryinterval=21

Running Netsh commands from the Cmd.exe command prompt

When you run Netsh from the Cmd.exe command prompt, netsh uses the following syntax. To run these Netsh commands on a remote Windows 2000 Server, you must first use Remote Desktop Connection to connect to a Windows 2000 Server that is running Terminal Server. There might be functional differences between Netsh context commands on Windows 2000 and Windows XP.

To view the command syntax, click the following command:

netsh 

Netsh is a command-line scripting utility that allows you to, either locally or remotely, display or modify the network configuration of a currently running computer. Used without parameters, netsh opens the Netsh.exe command prompt (that is, netsh>).

Syntax

netsh [-a AliasFile] [-c Context] [-r RemoteComputer] [{NetshCommand|-f ScriptFile}]

Parameters

-a   : Returns you to the netsh prompt after running AliasFile.

AliasFile   : Specifies the name of the text file that contains one or more netsh commands.

-c   : Changes to the specified netsh context.

Context   : Specifies the netsh context. The following table lists the available netsh contexts.

Context

Description

AAAA

Shows and sets the configuration of the authentication, authorization, accounting, and auditing (AAAA) database used by the Internet Authentication Service (IAS) and the Routing and Remote Access service.

DHCP

Administers DHCP servers and provides an equivalent alternative to console-based management.

Diag

Administers and troubleshoots operating system and network service parameters.

Interface

Configures the TCP/IP protocol (including addresses, default gateways, DNS servers, and WINS servers) and displays configuration and statistical information.

RAS

Administers remote access servers.

Routing

Administers Routing servers.

WINS

Administers WINS servers.

-r   : Configures a remote computer.

RemoteComputer   : Specifies the remote computer to configure.

NetshCommand   : Specifies the netsh command that you want to run.

-f   : Exits Netsh.exe after running the script.

ScriptFile   : Specifies the script that you want to run.

/? : Displays help at the command prompt.

Remarks

  • Using -r 

    If you specify -r followed by another command, netsh executes the command on the remote computer and then returns to the Cmd.exe command prompt. If you specify -r without another command, netsh opens in remote mode. The process is similar to using set machine at the Netsh command prompt. When you use -r, you set the target computer for the current instance of netsh only. After you exit and reenter netsh, the target computer is reset as the local computer. You can run netsh commands on a remote computer by specifiying a computer name stored in WINS, a UNC name, an internet name to be resolved by the DNS server, or a numerical IP address.

Running Netsh commands from the Netsh.exe command prompt

Netsh uses the following standard commands in all contexts that you can run from a Netsh.exe command prompt (that is, netsh>). To run these Netsh commands on a remote Windows 2000 Server, you must first use Remote Desktop Connection to connect to a Windows 2000 Server that is running Terminal Server. There might be functional differences between Netsh context commands on Windows 2000 and Windows XP.

To view the command syntax, click a command:

..

Moves to the context that is one level up.

Syntax

.. 

Parameters

/? : Displays help at the command prompt.

abort

Discards any changes made in offline mode. Abort has no effect in online mode.

Syntax

abort

Parameters

/? : Displays help at the command prompt.

add helper

Installs the helper DLL in netsh.

Syntax

add helper DLLName 

Parameters

DLLName   : Required. Specifies the name of the helper DLL you want to install.

/? : Displays help at the command prompt.

alias

Adds an alias that consists of a user-defined character string, which netsh treats as equivalent to another character string. Used without parameters, alias displays all available aliases.

Syntax

alias [AliasName] [string1 [string2 ...]]

Parameters

alias [ AliasName ] : Displays the specified alias.

alias   [ AliasName ][ string1 [ string2 ...]] : Sets AliasName to the specified string(s).

/? : Displays help at the command prompt.

Examples

The following netsh sample script sets two netsh aliases, Shaddr and Shp, and then leaves the Netsh command prompt in the Interface IP context:

alias shaddr show interface ip addr
alias shp show helpers
interface ip

If you type shaddr at the Netsh command prompt, Netsh.exe interprets this as the command show interface ip addr. If you type shp at the Netsh command prompt, Netsh.exe interprets this as the command show helpers.

bye

Exits Netsh.exe.

Syntax

bye

Parameters

/? : Displays help at the command prompt.

commit

Commits any changes made in the offline mode to the router. Commit has no effect in online mode.

Syntax

commit

Parameters

/? : Displays help at the command prompt.

delete helper

Removes the helper DLL from netsh.

Syntax

delete helper DLLName

Parameters

DLLName   : Required. Specifies the name of the helper DLL you want to uninstall.

/? : Displays help at the command prompt.

dump

Creates a script that contains the current configuration. If you save this script to a file, you can use the file to restore configuration settings that have been changed. Used without parameters, dump displays all of the netsh context configurations.

Syntax

dump [FileName]

Parameters

[ FileName ] : Specifies the name of the file to which you want to redirect output.

/? : Displays help at the command prompt.

exec

Loads a script file and runs commands from it.

Syntax

exec ScriptFile

Parameters

ScriptFile   : Required. Specifies the name of the script that you want to load and run.

Remarks

  • The ScriptFile can run on one or more computers.

exit

Exits Netsh.exe.

Syntax

exit

Parameters

/? : Displays help at the command prompt.

help

Displays help.

Syntax

{/?|?|help|h}

Parameters

none

offline

Sets the current mode to offline.

Syntax

offline

Parameters

/? : Displays help at the command prompt.

Remarks

  • Changes that you make in this mode are saved, but you need to run the commit or online command to set the changes in the router.

  • When you switch from offline mode to online mode, changes that you made in offline mode are reflected in the configuration that is currently running.

  • Changes that you make in online mode are immediately reflected in the configuration that is currently running.

online

Sets the current mode to online.

Syntax

online

Parameters

/? : Displays help at the command prompt.

Remarks

  • Changes that you make in online mode are immediately reflected in the configuration that is currently running.

  • When you switch from offline mode to online mode, changes that you made in offline mode are reflected in the configuration that is currently running.

popd

Restores a context from the stack.

Syntax

popd 

Parameters

/? : Displays help at the command prompt.

Remarks

  • Used in conjunction with pushd, popd enables you to change the context, run the command in the new context, and then resume the prior context.

Examples

The following sample script changes a context from the root context to the interface ip context, adds a static IP route, and then returns to the root context:

netsh>

pushd

netsh>

interface ip

netsh interface ip>

set address local static 10.0.0.9 255.0.0.0 10.0.0.1 1

netsh interface ip>

popd 

netsh>

pushd

Saves the current context on a first-in-last-out (FILO) stack.

Syntax

pushd 

Parameters

/? : Displays help at the command prompt.

Remarks

  • Used in conjunction with popd, pushd enables you to change the context, run the command in the new context, and then resume the prior context.

quit

Exits Netsh.exe.

Syntax

quit

Parameters

/? : Displays help at the command prompt.

set file

Copies the Command Prompt window output to a file.

Syntax

set file {open FileName|append FileName|close}

Parameters

open   FileName   : Sends the Command Prompt window output to the specified file.

append   FileName   : Appends the Command Prompt window output to the specified existing file.

close   : Stops sending output and closes a file.

/? : Displays help at the command prompt.

Remarks

  • Using FileName 

    If the specified FileName does not currently exist, netsh creates a new file with that name. If the specified FileName does currently exist, netsh overwrites the existing data.

Examples

To create a new log file called Session.log and copy all succeeding netsh input and output to Session.log, type:

set file open c:\session.log

set machine

Sets the current computer on which to perform configuration tasks. Used without parameters, set machine sets the local computer.

Syntax

set machine [[ComputerName**=**]string]

Parameters

ComputerName   : Specifies the name of the computer on which to perform configuration tasks.

string   : Specifies the location of the remote computer.

/? : Displays help at the command prompt.

Remarks

  • Performing configuration tasks on multiple computers

    You can run commands on multiple computers from a single script. You can use set machine in a script to specify a destination computer (for example, ComputerA), and then run the commands that follow set machine on this computer (that is, ComputerA). You can then use set machine to specify another destination computer (for example, ComputerB), and then run commands on this computer (that is, ComputerB).

set mode

Sets the current mode to online or offline.

Syntax

set mode {online|offline}

Parameters

online   : Sets the current mode to online.

offline   : Sets the current mode to offline.

/? : Displays help at the command prompt.

show 

Displays alias, helper, and mode information.

Syntax

show {alias|helper|mode}

Parameters

alias   : Lists all defined aliases.

helper   : Lists all top-level helpers.

mode   : Displays the current mode.

/? : Displays help at the command prompt.

unalias

Deletes the specified alias.

Syntax

unalias AliasName

Parameters

AliasName   : Required. Specifies the name of the alias.

/? : Displays help at the command prompt.

Formatting legend

Format

Meaning

Italic

Information that the user must supply

Bold

Elements that the user must type exactly as shown

Ellipsis (...)

Parameter that can be repeated several times in a command line

Between brackets ([])

Optional items

Between braces ({}); choices separated by pipe (|). Example: {even|odd}

Set of choices from which the user must choose only one

Courier font

Code or program output