DiskPart Utility Commands (Windows Embedded CE 6.0)
1/5/2010
The following list shows the commands that the DiskPart command prompt utility supports:
| Command | Action |
|---|---|
ACTIVE |
Sets the selected partition to active. The boot sector is read from this partition. |
INACTIVE |
Clears the active flag on the partition. |
CLEAN |
Deletes the whole partition on the selected disk. |
CREATE |
Creates a primary partition on the selected disk. |
DELETE |
Deletes the selected partition from the selected disk. |
LIST |
Displays all the disks, or the partitions on a selected disk. |
SELECT |
Selects a disk or partition to use for future operations. |
DUMPMBR |
Displays the partition table of the master boot record (MBR). |
DUMPSTORE |
Displays the STOREINFO for the selected disk. |
DUMPPART |
Displays the PARTINFO for the selected partition. |
ZERO |
Writes all zeros to a given sector |
DUMPSECTOR |
Displays the contents of a sector on the disk. |
MBRCODE |
Writes a file to the MBR code section |
BOOTSEC |
Writes a file to the given sector on the disk. |
FIXPARTOFFSET |
Updates the Bios Parameter Block (BPB) with the correct offset of the partition. |
HELP |
Displays a list of supported commands. |
To view DiskPart command Help topics, at the command prompt, enter DiskPart, and then enter the name of the command. Do not include additional parameters.