OID_DOT11_CURRENT_DWELL_TIME (Compact 2013)
3/26/2014
When queried, this object identifier (OID) requests that the miniport driver return the value of the IEEE 802.11 dot11CurrentDwellTime management information base (MIB) object for the current PHY type on the 802.11 station.
This MIB object defines the amount of time that the current PHY type can use when it transmits on a single channel.
Note
Support for OID_DOT11_CURRENT_DWELL_TIME is mandatory if the network adapter supports the dot11_phy_type_fhss PHY type. For more information about how the miniport driver specifies its list of supported PHY types, see OID_DOT11_SUPPORTED_PHY_TYPES.
The data type for this OID is a ULONG value that specifies the maximum dwell time in units of 802.11 time units (TU). One TU is 1024 microseconds. The value of the dot11CurrentDwellTime MIB must be from 1 through 65535.
The dot11CurrentDwellTime MIB object is only valid for the frequency-hopping spread spectrum (FHSS) PHY type. If the current PHY type is not set to dot11_phy_type_fhss, the miniport driver must fail the query request by returning NDIS_STATUS_INVALID_DATA from its MiniportOidRequest function.
If the miniport driver is operating in Extensible Station (ExtSTA) mode, the current PHY type is determined through the ExtSTA msDot11CurrentPhyID MIB object. This MIB object specifies the index of the current PHY type within the 802.11 station’s list of supported PHY types. For more information about msDot11CurrentPhyID, see OID_DOT11_CURRENT_PHY_ID.
Requirements
Header |
windot11.h |
See Also
Reference
NDIS 5.x Legacy Wireless LAN OIDs
OID_DOT11_SUPPORTED_PHY_TYPES
MiniportOidRequest
OID_DOT11_CURRENT_PHY_ID
Native 802.11 MIB OIDs