IP Helper Functions (Compact 2013)

3/26/2014

This section describes IP Helper functions

In This Section

Adapter Management Functions

• GetAdapterIndex
  Obtains the index of an adapter, given its name.

• GetAdaptersAddresses
  Retrieves the addresses associated with the adapters on the local device.

• GetPerAdapterInfo
  Retrieves information about the adapter that corresponds to the specified interface.

• GetUniDirectionalAdapterInfo
  Retrieves information about the unidirectional adapters installed on the local device.

Address Resolution Protocol Management Functions

• CreateIpNetEntry
  Creates an Address Resolution Protocol (ARP) entry in the ARP table on the local device.

• CreateProxyArpEntry
  Creates a Proxy Address Resolution Protocol (PARP) entry on the local device for the specified IPv4 address.

• DeleteIpNetEntry
  Deletes an ARP entry from the ARP table on the local device.

• DeleteProxyArpEntry
  Deletes the PARP entry on the local device specified by the dwAddress and dwIfIndex parameters.

• FlushIpNetTable
  Deletes all ARP entries for the specified interface from the ARP table on the local device.

• GetIpNetTable
  Retrieves the IP-to-physical address mapping table.

• SendARP
  Sends an ARP request to obtain the physical address that corresponds to the specified destination IPv4 address.

• SetIpNetEntry
  Modifies an existing ARP entry in the ARP table on the local device.

Interface Conversion Functions

• ConvertInterfaceAliasToLuid
  Converts an interface alias name for a network interface to the LUID for the interface.

• ConvertInterfaceGuidToLuid
  Converts a GUID for a network interface to the LUID for the interface.

• ConvertInterfaceIndexToLuid
  Converts a local index for a network interface to the LUID for the interface.

• ConvertInterfaceLuidToAlias
  Converts a LUID for a network interface to an interface alias.

• ConvertInterfaceLuidToGuid
  Converts a LUID for a network interface to a GUID for the interface.

• ConvertInterfaceLuidToIndex
  Converts a LUID for a network interface to the local index for the interface.

• ConvertInterfaceLuidToNameA
  Converts a LUID for a network interface to the ANSI interface name.

• ConvertInterfaceLuidToNameW
  Converts a LUID for a network interface to the Unicode interface name.

• ConvertInterfaceNameToLuidA
  Converts an ANSI network interface name to the LUID for the interface.

• ConvertInterfaceNameToLuidW
  Converts a Unicode network interface name to the LUID for the interface.

• if_indextoname
  Converts the local index for a network interface to the ANSI interface name.

• if_nametoindex
  Converts the ANSI interface name for a network interface to the local index for the interface.

Interface Management Functions

• GetFriendlyIfIndex
  Takes an interface index and returns a backward-compatible interface index, that is, an index that uses only the lower 24 bits.

• GetIfEntry
  Retrieves information for the specified interface on the local device.

• GetIfEntry2
  Retrieves information for the specified interface on the local device.

• GetIfStackTable
  Retrieves a table of network interface stack row entries that specify the relationship of the network interfaces on an interface stack.

• GetIfTable
  Retrieves the MIB-II interface table.

• GetIfTable2
  Retrieves the MIB-II interface table.

• GetIfTable2Ex
  Retrieves the MIB-II interface table.

• GetInterfaceInfo
  Obtains the list of the network interface adapters with IPv4 enabled on the local system.

• GetInvertedIfStackTable
  Retrieves a table of inverted network interface stack row entries that specify the relationship of the network interfaces on an interface stack.

• GetIpInterfaceEntry
  Retrieves IP information for the specified interface on the local device.

• GetIpInterfaceTable
  Retrieves the IP interface entries on the local device.

• GetNumberOfInterfaces
  Retrieves the number of interfaces on the local device.

• InitializeIpInterfaceEntry
  Initializes the members of an MIB_IPINTERFACE_ROW entry with default values.

• SetIfEntry
  Sets the administrative status of an interface.

• SetIpInterfaceEntry
  Sets the properties of an IP interface on the local device.

IP and Internet Control Message Protocol Functions

• GetIcmpStatistics
  Retrieves the Internet Control Message Protocol (ICMP) statistics for the local device.

• GetIpStatistics
  Retrieves the IP statistics for the current device.

• Icmp6CreateFile
  Opens a handle on which IPv6 ICMP echo requests can be issued.

• Icmp6ParseReplies
  Parses the reply buffer provided and returns an IPv6 ICMPv6 echo response reply if found.

• Icmp6SendEcho2
  Sends an IPv6 ICMPv6 echo request and returns either immediately (if Event or ApcRoutine is non-NULL) or returns after the specified time-out.

• IcmpCloseHandle
  This function closes a handle opened by a call to the IcmpCreateFile or Icmp6CreateFile functions.

• IcmpCreateFile
  Opens a handle on which IPv4 ICMP echo requests can be issued.

• IcmpParseReplies
  Parses the reply buffer provided and returns the number of ICMP echo request responses found.

• IcmpSendEcho
  Sends an IPv4 ICMP echo request and returns any echo response replies The call returns when the time-out has expired or the reply buffer is filled.

• IcmpSendEcho2
  Sends an IPv4 ICMP echo request and returns either immediately (if Event or ApcRoutine is non-NULL) or returns after the specified time-out.

• SetIpTTL
  Sets the default Time to Live (TTL) value for the local device.

IP Address Management Functions

• AddIPAddress
  Adds the specified IPv4 address to the specified adapter.

• CreateAnycastIpAddressEntry
  Adds a new anycast IP address entry on the local device.

• CreateUnicastIpAddressEntry
  Adds a new unicast IP address entry on the local device.

• DeleteIPAddress
  Deletes an IP address previously added by using AddIPAddress.

• DeleteAnycastIpAddressEntry
  Deletes an existing anycast IP address entry on the local device.

• DeleteUnicastIpAddressEntry
  Deletes an existing unicast IP address entry on the local device.

• GetAnycastIpAddressEntry
  Retrieves information for an existing anycast IP address entry on the local device.

• GetAnycastIpAddressTable
  Retrieves the anycast IP address table on the local device.

• GetIpAddrTable
  Retrieves the interface-to-IPv4 address mapping table.

• GetMulticastIpAddressEntry
  Retrieves information for an existing multicast IP address entry on the local device.

• GetMulticastIpAddressTable
  Retrieves the multicast IP address table on the local device.

• GetUnicastIpAddressEntry
  Retrieves information for an existing unicast IP address entry on the local device.

• GetUnicastIpAddressTable
  Retrieves the unicast IP address table on the local device.

• InitializeUnicastIpAddressEntry
  Initializes a MIB_UNICASTIPADDRESS_ROW structure with default values for a unicast IP address entry on the local device.

• IpReleaseAddress
  Releases an IPv4 address previously obtained through DHCP.

• IpRenewAddress
  Renews a lease on an IPv4 address previously obtained through DHCP.

• NotifyStableUnicastIpAddressTable
  Retrieves the stable unicast IP address table on a local device.

• SetUnicastIpAddressEntry
  Sets the properties of an existing unicast IP address entry on the local device.

IP Neighbor Address Management Functions

• CreateIpNetEntry2
  Creates a new neighbor IP address entry on the local device.

• DeleteIpNetEntry2
  Deletes a neighbor IP address entry on the local device.

• FlushIpNetTable2
  Flushes the IP neighbor table on the local device.

• GetIpNetEntry2
  Retrieves information for a neighbor IP address entry on the local device.

• GetIpNetTable2
  Retrieves the IP neighbor table on the local device.

• ResolveIpNetEntry2
  Resolves the physical address for a neighbor IP address entry on the local device.

• ResolveNeighbor
  Deprecated.

  Resolves the physical address for a neighbor IP address entry on the local device.

• SetIpNetEntry2
  Sets the physical address of an existing neighbor IP address entry on the local device.

IP Path Management Functions

• FlushIpPathTable
  Flushes the IP path table on the local device.

• GetIpPathEntry
  Retrieves information for an IP path entry on the local device.

• GetIpPathTable
  Retrieves the IP path table on the local device.

IP Route Management Functions

• CreateIpForwardEntry
  Creates a route in the local device's IPv4 routing table.

• CreateIpForwardEntry2
  Creates a new IP route entry on the local device.

• DeleteIpForwardEntry
  Deletes an existing route in the local device's IPv4 routing table

• DeleteIpForwardEntry2
  Deletes an IP route entry on the local device.

• EnableRouter
  Turns on IPv4 forwarding on the local device EnableRouter also increments a reference count that tracks the number of requests to enable IPv4 forwarding.

• GetBestInterface
  Retrieves the index of the interface that has the best route to the specified IPv4 address.

• GetBestInterfaceEx
  Retrieves the index of the interface that has the best route to the specified IPv4 or IPv6 address.

• GetBestRoute
  Retrieves the best route to the specified destination IP address.

• GetBestRoute2
  Retrieves the IP route entry on the local device for the best route to the specified destination IP address.

• GetIpForwardEntry2
  Retrieves information for an IP route entry on the local device.

• GetIpForwardTable
  Retrieves the IPv4 routing table.

• GetIpForwardTable2
  Retrieves the IP route entries on the local device.

• GetRTTAndHopCount
  Determines the round-trip time (RTT) and hop count to the specified destination.

• InitializeIpForwardEntry
  Initializes a MIB_IPFORWARD_ROW2 structure with default values for an IP route entry on the local device.

• SetIpForwardEntry
  Modifies an existing route in the local device's IPv4 routing table

• SetIpForwardEntry2
  Sets the properties of an IP route entry on the local device.

• SetIpStatistics
  Toggles IP forwarding on or off and sets the default Time to Live (TTL) value for the local device.

• SetIpStatisticsEx
  Toggles IP forwarding on or off and sets the default Time to Live (TTL) value for the local device.

• UnenableRouter
  This function decrements the reference count that tracks the number of requests to enable IPv4 forwarding.

IP Table Memory Management Functions

• FreeMibTable
  This function frees the buffer allocated by the functions that return tables of network interfaces, addresses, and routes.

IP Utility Functions

• ConvertIpv4MaskToLength
  Converts an IPv4 subnet mask to an IPv4 prefix length.

• ConvertLengthToIpv4Mask
  Converts an IPv4 prefix length to an IPv4 subnet mask.

• CreateSortedAddressPairs
  Takes a supplied list of potential IP destination addresses, pairs the destination addresses together with the host machine's local IP addresses, and sorts the pairs according to which address pair is best suited for communication between the two peers.

Network Configuration Functions

• GetNetworkParams
  Retrieves network parameters for the local device.

Notification Functions

• CancelMibChangeNotify2
  Deregisters for change notifications for IP interface changes, IP address changes, IP route changes, and requests to retrieve the stable Unicast IP address table.

• NotifyAddrChange
  Causes a notification to be sent to the caller when a change occurs in the table that maps IPv4 addresses to interfaces.

• NotifyIpInterfaceChange
  Registers to be notified for changes to all IP interfaces, IPv4 interfaces, or IPv6 interfaces on a local device.

• NotifyRouteChange
  Causes a notification to be sent to the caller when a change occurs in the IPv4 routing table.

• NotifyRouteChange2
  Registers to be notified for changes to IP route entries on a local device.

• NotifyUnicastIpAddressChange
  Registers to be notified for changes to all unicast IP interfaces, unicast IPv4 addresses, or unicast IPv6 addresses on a local device.

TCP and UDP

• GetExtendedTcpTable
  Retrieves a table that contains a list of TCP endpoints available to the application.

• GetExtendedUdpTable
  Retrieves a table that contains a list of UDP endpoints available to the application.

• GetOwnerModuleFromTcp6Entry
  Retrieves data about the module that issued the context bind for a specific IPv6 TCP endpoint in a MIB table row.

• GetOwnerModuleFromTcpEntry
  Retrieves data about the module that issued the context bind for a specific IPv4 TCP endpoint in a MIB table row.

• GetOwnerModuleFromUdp6Entry
  Retrieves data about the module that issued the context bind for a specific IPv6 UDP endpoint in a MIB table row.

• GetOwnerModuleFromUdpEntry
  Retrieves data about the module that issued the context bind for a specific IPv4 UDP endpoint in a MIB table row.

• GetPerTcp6ConnectionEStats
  Retrieves extended statistics for an IPv6 TCP connection.

• GetPerTcpConnectionEStats
  Retrieves extended statistics for an IPv4 TCP connection.

• GetTcpStatistics
  Retrieves the TCP statistics for the local device.

• GetTcpStatisticsEx
  Retrieves the Transmission Control Protocol (TCP) statistics for the current device.

• GetTcp6Table
  Retrieves the TCP connection table for IPv6.

• GetTcp6Table2
  Retrieves the TCP connection table for IPv6.

• GetTcpTable
  Retrieves the IPv4 TCP connection table.

• GetTcpTable2
  Retrieves the IPv4 TCP connection table.

• SetPerTcp6ConnectionEStats
  Sets a value in the read/write information for an IPv6 TCP connection.

• SetPerTcpConnectionEStats
  Sets a value in the read/write information for an IPv4 TCP connection.

• SetTcpEntry
  Sets the state of a TCP connection.

• GetUdp6Table
  Retrieves the IPv6 UDP listener table.

• GetUdpStatistics
  Retrieves the UDP statistics for the local device.

• GetUdpStatisticsEx
  Retrieves the UDP statistics for the current device.

• GetUdpTable
  Retrieves the IPv4 UDP listener table.

Deprecated APIs

• AllocateAndGetTcpExTableFromStack
  Retrieves the TCP connection table and allocates memory from the local heap to store the table.

• AllocateAndGetUdpExTableFromStack
  Retrieves the UDP connection table and allocates memory from the local heap to store the table.

See Also

Reference

IP Helper Reference