Prerequisites for the IR Port Test (Winsock 2.0) (Windows Embedded CE 6.0)
1/6/2010
The following table shows the hardware requirement for the IR Port Test (Winsock 2.0).
| Requirement | Description |
|---|---|
Two installed IR devices |
You must install one IR device on a test server and another IR device on a test client. You should position the IR devices in close proximity to one another. You should point each IR device directly at the other IR device. |
You can run the IR Port Test (Winsock 2.0) using either IR or a TCP/IP network as a control channel. If you use a TCP/IP network, the client and server must be on the TCP/IP network and must be able to communicate with each other.
Note
You can run the IR Port Test (Winsock 2.0) without a server.
The following table shows the software requirements for the IR Port Test (Winsock 2.0).
| Requirements | Description |
|---|---|
Tux.exe |
Tux test harness, required for executing the test |
Kato.dll |
Kato logging engine, required for logging test data |
Irapi22.dll |
Library containing test cases |
The following table shows the software requirements for running the IR Port Test (Winsock 2.0) on the test server.
| Requirements | Description |
|---|---|
Kato.dll |
Kato logging engine, required for logging test data |
Irapisrv22.exe |
Library containing test cases |
To run the IR Port Test (Winsock 2.0), before you build your run-time image, you must include the Winsock 2.0 and IR catalog items in your OS design.