Partager via

DOT11_AUTH_ALGORITHM (Compact 2013)

  • Article

3/26/2014

This enumerated type defines a wireless LAN authentication algorithm.

Syntax

typedef enum _DOT11_AUTH_ALGORITHM {
DOT11_AUTH_ALGO_80211_OPEN = 1,
DOT11_AUTH_ALGO_80211_SHARED_KEY = 2,
DOT11_AUTH_ALGO_WPA = 3,
DOT11_AUTH_ALGO_WPA_PSK = 4,
DOT11_AUTH_ALGO_WPA_NONE = 5,
DOT11_AUTH_ALGO_RSNA = 6,
DOT11_AUTH_ALGO_RSNA_PSK = 7,
DOT11_AUTH_ALGO_IVH_START = 0x80000000,
DOT11_AUTH_ALGO_IVH_END = 0xffffffff,
} DOT11_AUTH_ALGORITHM,
*PDOT11_AUTH_ALGORITHM;

Constants

  • DOT11_AUTH_ALGO_80211_OPEN
    Specifies an IEEE 802.11 Open System authentication algorithm
  • DOT11_AUTH_ALGO_80211_SHARED_KEY
    Specifies an 802.11 Shared Key authentication algorithm that requires the use of a pre-shared Wired Equivalent Privacy (WEP) key for the 802.11 authentication

  • DOT11_AUTH_ALGO_WPA
    Specifies a Wi-Fi Protected Access (WPA) algorithm. IEEE 802.1X port authentication is performed by the supplicant, authenticator, and authentication server. Cipher keys are dynamically derived through the authentication process.

    This algorithm is valid only for BSS types of dot11_BSS_type_infrastructure.

    When the WPA algorithm is enabled, the 802.11 station will associate only with an access point whose beacon or probe responses contain the authentication suite of type 1 (802.1X) within the WPA information element (IE).

  • DOT11_AUTH_ALGO_WPA_PSK
    Specifies a WPA algorithm that uses preshared keys (PSK). IEEE 802.1X port authentication is performed by the supplicant and authenticator. Cipher keys are dynamically derived through a preshared key that is used on both the supplicant and authenticator.

    When the WPA PSK algorithm is enabled, the 802.11 station will associate only with an access point whose beacon or probe responses contain the authentication suite of type 2 (preshared key) within the WPA IE.

  • DOT11_AUTH_ALGO_WPA_NONE
    This value is not supported

  • DOT11_AUTH_ALGO_RSNA
    Specifies an 802.11i Robust Security Network Association (RSNA) algorithm. WPA2 is one such algorithm. IEEE 802.1X port authentication is performed by the supplicant, authenticator, and authentication server. Cipher keys are dynamically derived through the authentication process.

    When the RSNA algorithm is enabled, the 802.11 station will associate only with an access point whose beacon or probe responses contain the authentication suite of type 1 (802.1X) within the RSN IE.

  • DOT11_AUTH_ALGO_RSNA_PSK
    Specifies an 802.11i RSNA algorithm that uses PSK. IEEE 802.1X port authentication is performed by the supplicant and authenticator. Cipher keys are dynamically derived through a preshared key that is used on both the supplicant and authenticator.

    When the RSNA PSK algorithm is enabled, the 802.11 station will associate only with an access point whose beacon or probe responses contain the authentication suite of type 2(preshared key) within the RSN IE.

  • DOT11_AUTH_ALGO_IHV_START
    Indicates the start of the range that specifies proprietary authentication algorithms that are developed by an IHV.

    The DOT11_AUTH_ALGO_IHV_START enumerator is valid only when the miniport driver is operating in Extensible Station (ExtSTA) mode.

  • DOT11_AUTH_ALGO_IHV_END
    Indicates the end of the range that specifies proprietary authentication algorithms that are developed by an IHV.

    The DOT11_AUTH_ALGO_IHV_END enumerator is valid only when the miniport driver is operating in ExtSTA mode.

See Also

Reference

Native Wi-Fi Enumerations
DOT11_AUTH_CIPHER_PAIR
WLAN_AVAILABLE_NETWORK
WLAN_SECURITY_ATTRIBUTES
Native Wi-Fi Reference