How to Use the BSP for the SMDK2410 Samsung MCU Development Kit
You can use the sample board support package (BSP) provided by Platform Builder to quickly evaluate the new Windows CE .NET operating system (OS) features on the SMDK2410 Samsung MCU Development Kit.
For more information about the sample BSPs included in Platform Builder for ARM microprocessors, see ARM Board Support Packages.
Hardware and Software Assumptions
You included support for ARMV4 and ARMV4I microprocessors when you installed Platform Builder 4.2. If you did not, reinstall Platform Builder.
Note The ARMV4I is an ARMV4 build that supports interworking, which enables the ARMV4I to handle 32-bit code to and from 16-bit code jumps. The ARMV4 kernel image is the same as the ARMV4I kernel image, except it does not support interworking. The ARMV4 kernel image is compatible with the Intel SA1100 StrongARM architecture. Once you select your choice of microprocessor support, all the necessary tools and code binaries needed to support the processor architecture are installed.
You are downloading a Windows CE OS image to an Intel SMDK2410 Samsung MCU Development Kit.
To track your progress in the following table, select the check box next to each step.
| Step | Topic | |
|---|---|---|
| 1. From the New Platform Wizard, select support for either or both the ARMV4 and ARMV4I microprocessors. | Creating a Platform | |
| 2. Review the supported hardware and software features on the SDB and familiarize yourself with any limitations that may affect your platform on the SDB. | SMDK2410 Samsung MCU Development Kit Supported Features | |
| 3. Set up the SDB. | Setting up the SMDK2410 Samsung MCU Development Kit Hardware | |
| 4. Modify the switch and jumper settings on the SDB. | Modifying the SMDK2410 Samsung MCU Development Kit Switches and Jumpers | |
| 5. Configure the Microsoft HyperTerminal application to receive debug messages. | Configuring HyperTerminal for BSPs | |
| 6. Build the platform. | Building a Platform | |
| 7. Download the Ethernet boot loader to the SDB. | Downloading the Boot Loader to the SMDK2410 Samsung MCU Development Kit | |
| 8. Download the OS image to the SDB. | Downloading the OS Image to the SMDK2410 Samsung MCU Development Kit |
See Also
Supported Board Support Packages
Last updated on Wednesday, April 13, 2005
© 2005 Microsoft Corporation. All rights reserved.