Bluetooth Audio Logo Test (Manual) - Certification

This manual test verifies audio functionality within a Bluetooth device.

Parameter:

[WDKDeviceID] - set this parameter to device ID when scheduling from Job Explorer for private testing.

Please refer to WDK documentation for details about this test!

Test details

Associated requirements	Device.Audio.Bluetooth.AtleastOneProfileSupport Device.Audio.Bluetooth.DriverReqs Device.Audio.Bluetooth.HCIDisconnect See the device hardware requirements.
Platforms	Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2
Expected run time	~4 minutes
Categories	Certification
Type	Manual

Before you run the test, complete the test setup as described in the test requirements: Audio Device Testing Prerequisites.

For troubleshooting information, see Troubleshooting Audio Testing.

All test cases return PASS or FAIL. For specific information about failures, review the test results in the log file.

The test returns PASS if the following occur:

The Bluetooth audio device and driver support one or more of the following Bluetooth profiles: Handsfree Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video Remote Control Profile (AVRCP).
The Bluetooth audio device supports the Major/Minor Class of Device identifier and accurately reflect form factor and primary usage.
The device and third-party driver support the "Windows 7 HID Call Control" specification appropriately.
The Bluetooth audio device that is paired with a computer automatically attempts to reconnect to the computer after it is turned on or comes back into range.
The Bluetooth audio device completes an HCIDisconnect operation before it shuts down.

The test returns SKIP if no Bluetooth device that supports the previously mentioned Bluetooth profiles is enumerated on the system.

Command option	Description
Shellrunner	Without any options, the test enumerates devices.
-c [string]	This option starts the application and runs the test cases that are specified in the .profile file.
-h [string]	This option specifies the Plug and Play (PnP) ID of the device to be tested.

Note

For command-line help for this test binary, type /h.

File	Location
Shellrunner.exe	<testbinroot>\nttest\multimediatest\common\
BTAudLogo.dll	<testbinroot>\nttest\multimediatest\avcore\audio\wdk
Logo_win7_btaudlogo.pro	<testbinroot>\nttest\multimediatest\AVCore\Audio\Profiles\
S98wtt_u.dll	<testbinroot>\nttest\multimediatest\common\