Partager via

Appendix D: Securing Built-In Administrator Accounts in Active Directory

  • Article

 

Applies To: Windows Server 2008, Windows Server 2008 R2, Windows Server 2012 R2, Windows Server 2012

Appendix D: Securing Built-In Administrator Accounts in Active Directory

In each domain in Active Directory, an Administrator account is created as part of the creation of the domain. This account is by default a member of the Domain Admins and Administrators groups in the domain, and if the domain is the forest root domain, the account is also a member of the Enterprise Admins group.

Use of a domain’s Administrator account should be reserved only for initial build activities, and possibly, disaster-recovery scenarios. To ensure that an Administrator account can be used to effect repairs in the event that no other accounts can be used, you should not change the default membership of the Administrator account in any domain in the forest. Instead, you should secure the Administrator account in each domain in the forest as described in the following section and detailed in the step-by-step instructions that follow.

Controls for Built-in Administrator Accounts

For the built-in Administrator account in each domain in your forest, you should configure the following settings:

  • Enable the Account is sensitive and cannot be delegated flag on the account.

  • Enable the Smart card is required for interactive logon flag on the account.

  • Disable the account.

  • Configure GPOs to restrict the Administrator account’s use on domain-joined systems:

    • In one or more GPOs that you create and link to workstation and member server OUs in each domain, add each domain’s Administrator account to the following user rights in Computer Configuration\Policies\Windows Settings\Security Settings\Local Settings\User Rights Assignments:

      • Deny access to this computer from the network

      • Deny log on as a batch job

      • Deny log on as a service

      • Deny log on through Remote Desktop Services

Note

When you add accounts to this setting, you must specify whether you are configuring local Administrator accounts or domain Administrator accounts. For example, to add the NWTRADERS domain’s Administrator account to these deny rights, you must type the account as NWTRADERS\Administrator, or browse to the Administrator account for the NWTRADERS domain. If you type “Administrator” in these user rights settings in the Group Policy Object Editor, you will restrict the local Administrator account on each computer to which the GPO is applied.
We recommend restricting local Administrator accounts on member servers and workstations in the same manner as domain-based Administrator accounts. Therefore you should generally add the Administrator account for each domain in the forest and the Administrator account for the local computers to these user rights settings. The following screenshot shows an example of configuring these user rights to block local Administrator accounts and a domain’s Administrator account from performing logons that should not be needed for these accounts.

  • Configure GPOs to restrict Administrator accounts on domain controllers

    • In each domain in the forest, the Default Domain Controllers GPO or a policy linked to the domain controllers OU should be modified to add each domain’s Administrator account to the following user rights in Computer Configuration\Policies\Windows Settings\Security Settings\Local Settings\User Rights Assignments:

      • Deny access to this computer from the network

      • Deny log on as a batch job

      • Deny log on as a service

      • Deny log on through Remote Desktop Services

Note

These settings will ensure that the domain’s built-in Administrator account cannot be used to connect to a domain controller, although the account, if enabled, can log on locally to domain controllers. Because this account should only be enabled and used in disaster-recovery scenarios, it is anticipated that physical access to at least one domain controller will be available, or that other accounts with permissions to access domain controllers remotely can be used.

  • Configure Auditing of Administrator Accounts

    When you have secured each domain’s Administrator account and disabled it, you should configure auditing to monitor for changes to the account. If the account is enabled, its password is reset, or any other modifications are made to the account, alerts should be sent to the users or teams responsible for administration of Active Directory, in addition to incident response teams in your organization.

Step-by-Step Instructions to Secure Built-in Administrator Accounts in Active Directory

  1. In Server Manager, click Tools, and click Active Directory Users and Computers.

  2. To prevent attacks that leverage delegation to use the account’s credentials on other systems, perform the following steps:

    1. Right-click the Administrator account and click Properties.

    2. Click the Account tab.

    3. Under Account options, select Account is sensitive and cannot be delegated flag as indicated in the following screenshot, and click OK.

  3. To enable the Smart card is required for interactive logon flag on the account, perform the following steps:

    1. Right-click the Administrator account and select Properties.

    2. Click the Account tab.

    3. Under Account options, select the Smart card is required for interactive logon flag as indicated in the following screenshot, and click OK.

  4. To disable the account, perform the following steps:

    1. Right-click the Administrator account and click Properties.

    2. Click the Account tab.

    3. In the Account options field, select the Account is disabled flag as indicated in the following screenshot, and click OK.

Configuring GPOs to Restrict Administrator Accounts at the Domain-Level

Warning

This GPO should never be linked at the domain-level because it can make the built-in Administrator account unusable, even in disaster recovery scenarios.

  1. In Server Manager, click Tools, and click Group Policy Management.

  2. In the console tree, expand <Forest>\Domains\<Domain>, and then Group Policy Objects (where <Forest> is the name of the forest and <Domain> is the name of the domain where you want to create the Group Policy).

  3. In the console tree, right-click Group Policy Objects, and click New.

  4. In the New GPO dialog box, type <GPO Name>, and click OK (where <GPO Name> is the name of this GPO) as indicated in the following screenshot.

  5. In the details pane, right-click <GPO Name>, and click Edit.

  6. Navigate to Computer Configuration\Policies\Windows Settings\Security Settings\Local Policies, and click User Rights Assignment.

  7. Configure the user rights to prevent the Administrator account from accessing members servers and workstations over the network by doing the following:

    1. Double-click Deny access to this computer from the network and select Define these policy settings.

    2. Click Add User or Group and click Browse.

    3. Type Administrator, click Check Names, and click OK. Verify that the account is displayed in <DomainName>\Username format as indicated in the following screenshot.

    4. Click OK, and OK again.

  8. Configure the user rights to prevent the Administrator account from logging on as a batch job by doing the following:

    1. Double-click Deny log on as a batch job and select Define these policy settings.

    2. Click Add User or Group and click Browse.

    3. Type Administrator, click Check Names, and click OK. Verify that the account is displayed in <DomainName>\Username format as indicated in the following screenshot.

    4. Click OK, and OK again.

  9. Configure the user rights to prevent the Administrator account from logging on as a service by doing the following:

    1. Double-click Deny log on as a service and select Define these policy settings.

    2. Click Add User or Group and click Browse.

    3. Type Administrator, click Check Names, and click OK. Verify that the account is displayed in <DomainName>\Username format as indicated in the following screenshot.

    4. Click OK, and OK again.

  10. Configure the user rights to prevent the BA account from accessing member servers and workstations via Remote Desktop Services by doing the following:

    1. Double-click Deny log on through Remote Desktop Services and select Define these policy settings.

    2. Click Add User or Group and click Browse.

    3. Type Administrator, click Check Names, and click OK. Verify that the account is displayed in <DomainName>\Username format as indicated in the following screenshot.

    4. Click OK, and OK again.

  11. To exit Group Policy Management Editor, click File, and click Exit.

  12. In Group Policy Management, link the GPO to the member server and workstation OUs by doing the following:

    1. Navigate to the <Forest>\Domains\<Domain> (where <Forest> is the name of the forest and <Domain> is the name of the domain where you want to set the Group Policy).

    2. Right-click the OU that the GPO will be applied to and click Link an existing GPO.

    3. Select the GPO that you created and click OK.

    4. Create links to all other OUs that contain workstations.

    5. Create links to all other OUs that contain member servers.

Important

When you add the Administrator account to these settings, you specify whether you are configuring a local Administrator account or a domain Administrator account by how you label the accounts. For example, to add the TAILSPINTOYS domain’s Administrator account to these deny rights, you would browse to the Administrator account for the TAILSPINTOYS domain, which would appear as TAILSPINTOYS\Administrator. If you type “Administrator” in these user rights settings in the Group Policy Object Editor, you will restrict the local Administrator account on each computer to which the GPO is applied, as described earlier.

Verification Steps

The verification steps outlined here are specific to Windows 8 and Windows Server 2012.

Verify “Smart card is required for interactive logon” Account Option

  1. From any member server or workstation affected by the GPO changes, attempt to log on interactively to the domain by using the domain’s built-in Administrator account. After attempting to log on, a dialog box similar to the following should appear.

Verify “Account is disabled” Account Option

  1. From any member server or workstation affected by the GPO changes, attempt to log on interactively to the domain by using the domain’s built-in Administrator account. After attempting to log on, a dialog box similar to the following should appear.

Verify “Deny access to this computer from the network” GPO Settings

From any member server or workstation that is not affected by the GPO changes (such as a jump server), attempt to access a member server or workstation over the network that is affected by the GPO changes. To verify the GPO settings, attempt to map the system drive by using the NET USE command by performing the following steps:

  1. Log on to the domain using the domain’s built-in Administrator account.

  2. With the mouse, move the pointer into the upper-right or lower-right corner of the screen. When the Charms bar appears, click Search.

  3. In the Search box, type command prompt, right-click Command Prompt, and then click Run as administrator to open an elevated command prompt.

  4. When prompted to approve the elevation, click Yes.

  5. In the Command Prompt window, type net use \\<Server Name>\c$, where <Server Name> is the name of the member server or workstation you are attempting to access over the network.

  6. The following screenshot shows the error message that should appear.

Verify “Deny log on as a batch job” GPO Settings

From any member server or workstation affected by the GPO changes, log on locally.

Create a Batch File

  1. With the mouse, move the pointer into the upper-right or lower-right corner of the screen. When the Charms bar appears, click Search.

  2. In the Search box, type notepad, and click Notepad.

  3. In Notepad, type dir c:.

  4. Click File and click Save As.

  5. In the Filename field, type <Filename>.bat (where <Filename> is the name of the new batch file).

Schedule a Task

  1. With the mouse, move the pointer into the upper-right or lower-right corner of the screen. When the Charms bar appears, click Search.

  2. In the Search box, type task scheduler, and click Task Scheduler.

    Note

    On computers running Windows 8, in the Search box, type schedule tasks, and click Schedule tasks.

  3. On Task Scheduler, click Action, and click Create Task.

  4. In the Create Task dialog box, type <Task Name> (where <Task Name> is the name of the new task).

  5. Click the Actions tab, and click New.

  6. Under Action:, select Start a program.

  7. Under Program/script:, click Browse, locate and select the batch file created in the “Create a Batch File” section, and click Open.

  8. Click OK.

  9. Click the General tab.

  10. Under Security options, click Change User or Group.

  11. Type the name of the BA account at the domain-level, click Check Names, and click OK.

  12. Select Run whether the user is logged on or not and Do not store password. The task will only have access to local computer resources.

  13. Click OK.

  14. A dialog box should appear, requesting user account credentials to run the task.

  15. After entering the credentials, click OK.

  16. A dialog box similar to the following should appear.

Verify “Deny log on as a service” GPO Settings

  1. From any member server or workstation affected by the GPO changes, log on locally.

  2. With the mouse, move the pointer into the upper-right or lower-right corner of the screen. When the Charms bar appears, click Search.

  3. In the Search box, type services, and click Services.

  4. Locate and double-click Print Spooler.

  5. Click the Log On tab.

  6. Under Log on as:, select This account.

  7. Click Browse, type the name of the BA account at the domain-level, click Check Names, and click OK.

  8. Under Password: and Confirm password:, type the Administrator account’s password, and click OK.

  9. Click OK three more times.

  10. Right-click the Print Spooler service and select Restart.

  11. When the service is restarted, a dialog box similar to the following should appear.

Revert Changes to the Printer Spooler Service

  1. From any member server or workstation affected by the GPO changes, log on locally.

  2. With the mouse, move the pointer into the upper-right or lower-right corner of the screen. When the Charms bar appears, click Search.

  3. In the Search box, type services, and click Services.

  4. Locate and double-click Print Spooler.

  5. Click the Log On tab.

  6. Under Log on as:, select the Local System account, and click OK.

Verify “Deny log on through Remote Desktop Services” GPO Settings

  1. With the mouse, move the pointer into the upper-right or lower-right corner of the screen. When the Charms bar appears, click Search.

  2. In the Search box, type remote desktop connection, and click Remote Desktop Connection.

  3. In the Computer field, type the name of the computer that you want to connect to, and click Connect. (You can also type the IP address instead of the computer name.)

  4. When prompted, provide credentials for the name of the BA account at the domain-level.

  5. A dialog box similar to the following should appear.