SpiDevice Classe

Définition

public ref class SpiDevice sealed : IClosable

/// [Windows.Foundation.Metadata.ContractVersion(Windows.Devices.DevicesLowLevelContract, 65536)]
/// [Windows.Foundation.Metadata.MarshalingBehavior(Windows.Foundation.Metadata.MarshalingType.Agile)]
class SpiDevice final : IClosable

[Windows.Foundation.Metadata.ContractVersion(typeof(Windows.Devices.DevicesLowLevelContract), 65536)]
[Windows.Foundation.Metadata.MarshalingBehavior(Windows.Foundation.Metadata.MarshalingType.Agile)]
public sealed class SpiDevice : System.IDisposable

Public NotInheritable Class SpiDevice
Implements IDisposable

Héritage

Object Platform::Object IInspectable SpiDevice

Attributs

ContractVersionAttribute MarshalingBehaviorAttribute

Implémente

IClosable IDisposable

Configuration requise pour Windows

Exemples

L’exemple suivant illustre les fonctionnalités de base de cette API SPI et d’autres API SPI en montrant comment ouvrir un bus SPI par un nom convivial à l’aide des paramètres de connexion par défaut.

// Arduino SPIDigialPot example: http://arduino.cc/en/Tutorial/SPIDigitalPot 
// using digital potentiometer AD5206 the 50kohm variance 
async void Digipot_AD5206() 
{ 
    // Get a device selector query that will select buses with SP10 
    // property set on them (we expect only 1 SP10 bus at the end) 
    var spi0Aqs = SpiDevice.GetDeviceSelector("SPI0"); 
    // Find all buses using the AQS query formed above 
    var devicesInfo = await DeviceInformation.FindAllAsync(spi0Aqs); 

    // Construct time settings beforehand which can't be changed 
    // once a SPI device is created 
    const Int32 DigipotChipSelectLine = 0; 
    var settings = new SpiConnectionSettings(DigipotChipSelectLine); 

    // Ask the SPI bus to open a device with the connection settings 
    // provided. Once we go out of scope, the device will be released 
    using (var spiDev = await SpiDevice.FromIdAsync(devicesInfo[0].Id, settings)) 
    { 

        // data[0] is the channel address 
        // data[1] is the resistance step (0 - 255) 
        // 0 is max digipot resistance, and 255 is no resistance 
        byte[] data = { 0x0, 0x0 }; 

        // Go over the 6 channels of the digipot 
        for (byte channel = 0; channel < 6; ++channel) 
        { 
            data[0] = channel; 

            // Step the resistance on this channel from max to min 
            for (byte r = 0; r <= 255; ++r) 
            { 
                data[1] = r; 
                spiDev.Write(data); 
                await Task.Delay(100); 
            } 

            // Step the resistance on this channel from min to max 
            for (byte r = 255; r >= 0; --r) 
            { 
                data[1] = r; 
                spiDev.Write(data); 
                await Task.Delay(100); 
            } 
        } 
    } 
} 

L’exemple suivant montre comment utiliser cette API SPI et d’autres API SPI pour initialiser un appareil SPI avec des paramètres de connexion autres que les paramètres par défaut. Pour ce faire, il lit l’intensité lumineuse d’une photocellule analogique connectée à un convertisseur A/D ADC108S102 10 bits à 8 canaux.

// Knowing that an SPI bus with 'spiBusId' exist, and has the ADC connected 
// on 'chipSelectLine', read a digital sample from some sensor wired to 'channel' 
async Task<int> AnalogRead_ADC108S102(string spiBusId, Int32 chipSelectLine, byte channel) 
{ 
    var settings = new SpiConnectionSettings(chipSelectLine); 

    // The defaults (4MHz, 8-bit, Mode0) will not work here according 
    // to the datasheet. 
    // e.g The datasheet specifies a clock freq range (8MHz - 16MHz) 
    settings.ClockFrequency = 8000000; 
    // CPOL=1, CPHA=1 
    settings.Mode = SpiMode.Mode3; 
    // Conversion happens on a 16-bit frame 
    settings.DataBitLength = 16; 
    // The ADC108S102 has 8 input analog channels, where each can be 
    // connected to a specific analog sensor and each sensor is 
    // used by a different application independently 
    // The IO requests to the SPI bus are implicitly synchronized 
    // by the driver model, plus that the ADC configuration is per 
    // 1 sampling read 
    settings.SharingMode = SpiSharingMode.Shared; 

    // Ask the SPI bus to open a shared device with the connection settings 
    // provided. 
    using (var spiDev = await SpiDevice.FromIdAsync(spiBusId, settings)) 
    { 
        if (spiDev == null) 
            return -1; 

        // Set up control register to get a conversion on a specific 
        // channel address 
        byte[] write16bitData = { (byte)(channel << 3), 0 }; 
        byte[] read16bitData = new byte[2]; 
        // The transfer is guaranteed to be atomic according to SpbCx model 
        spiDev.TransferFullDuplex(write16bitData, read16bitData); 

        ushort result = BitConverter.ToUInt16(read16bitData, 0); 
        // Get rid of the 2 LSB zeros and mask the 10-bit sampled value 
        return (int)((result >> 2) & 0x3ff); 
    } 
} 

Propriétés

Méthodes

S’applique à

Voir aussi

• IClosable