Condividi tramite


GpioClx Event Callback Functions

This section describes the event callback functions that are defined by the GPIO framework extension (GpioClx). These functions are implemented by the GPIO controller driver. GpioClx calls these functions to perform I/O operations through GPIO pins and to manage GPIO interrupts. These event callback functions are defined in the Gpioclx.h header file.

In this section

Topic Description

CLIENT_ClearActiveInterrupts

The CLIENT_ClearActiveInterrupts event callback function clears active interrupts on a set of general-purpose I/O (GPIO) pins that are configured as interrupt inputs.

CLIENT_ConnectIoPins

The CLIENT_ConnectIoPins event callback function opens a logical connection to a set of general-purpose I/O (GPIO) pins and configures these pins for data read or write operations.

CLIENT_ControllerSpecificFunction

The CLIENT_ControllerSpecificFunction event callback function performs an operation that is specific to a particular general-purpose I/O (GPIO) controller.

CLIENT_DisableInterrupt

The CLIENT_DisableInterrupt event callback function disables interrupts on a general-purpose I/O (GPIO) pin that is configured as an interrupt input.

CLIENT_DisconnectIoPins

The CLIENT_DisconnectIoPins event callback function closes a logical connection to a set of general-purpose I/O (GPIO) pins that are configured for data read or write operations.

CLIENT_EnableInterrupt

The CLIENT_EnableInterrupt event callback function enables interrupts on a general-purpose I/O (GPIO) pin that is configured as an interrupt input.

CLIENT_MaskInterrupts

The CLIENT_MaskInterrupts event callback function masks interrupts on a set of general-purpose I/O (GPIO) pins that are configured as interrupt inputs.

CLIENT_PrepareController

The CLIENT_PrepareController event callback function performs any operations that are needed to make the general-purpose I/O (GPIO) controller ready to be accessed by the GPIO controller driver.

CLIENT_PreProcessControllerInterrupt

The CLIENT_PreProcessControllerInterrupt event callback function performs any pre-processing of a general-purpose I/O (GPIO) interrupt that must be done immediately if the ISR is scheduled to run at a later time.

CLIENT_QueryActiveInterrupts

The CLIENT_QueryActiveInterrupts event callback function queries the state of a set of general-purpose I/O (GPIO) pins that are configured as interrupt inputs.

CLIENT_QueryControllerBasicInformation

The CLIENT_QueryControllerBasicInformation event callback function retrieves the hardware attributes of the general-purpose I/O (GPIO) controller.

CLIENT_QueryEnabledInterrupts

The CLIENT_QueryEnabledInterrupts event callback function queries the state of a set of general-purpose I/O (GPIO) pins to determine which pins are both configured as interrupt inputs and enabled for interrupts.

CLIENT_QuerySetControllerInformation

The CLIENT_QuerySetControllerInformation event callback function queries the general-purpose I/O (GPIO) controller driver for the specified set of attributes of the GPIO controller.

CLIENT_ReadGpioPins

The CLIENT_ReadGpioPins event callback function reads a set of general-purpose I/O (GPIO) pins that are configured as data inputs.

CLIENT_ReadGpioPinsUsingMask

The CLIENT_ReadGpioPinsUsingMask event callback function reads a bank of general-purpose I/O (GPIO) pins.

CLIENT_ReconfigureInterrupt

The CLIENT_ReconfigureInterrupt event callback function reconfigures a general-purpose I/O (GPIO) pin that is used as an interrupt input.

CLIENT_ReleaseController

The CLIENT_ReleaseController event callback function performs operations that are needed when the general-purpose I/O (GPIO) controller device is no longer accessible.

CLIENT_RestoreBankHardwareContext

The CLIENT_RestoreBankHardwareContext event callback function restores the hardware context of a bank of general-purpose I/O (GPIO) pins.

CLIENT_SaveBankHardwareContext

The CLIENT_SaveBankHardwareContext event callback function saves the hardware context of a bank of general-purpose I/O (GPIO) pins.

CLIENT_StartController

The CLIENT_StartController event callback function performs operations that are needed when the general-purpose I/O (GPIO) controller device enters the D0 power state.

CLIENT_StopController

The CLIENT_StopController event callback function performs operations that are needed to prepare the general-purpose I/O (GPIO) controller device to exit the D0 power state.

CLIENT_UnmaskInterrupt

The CLIENT_UnmaskInterrupt event callback function unmasks the interrupt on a general-purpose I/O (GPIO) pin that is configured as an interrupt input.

CLIENT_WriteGpioPins

The CLIENT_WriteGpioPins event callback function writes to a set of general-purpose I/O (GPIO) pins that are configured as data outputs.

CLIENT_WriteGpioPinsUsingMask

The CLIENT_WriteGpioPinsUsingMask event callback function writes to a set of general-purpose I/O (GPIO) pins that are configured as data outputs.

 

 

 

Send comments about this topic to Microsoft