次の方法で共有

方法: リフレクションのみのコンテキストにアセンブリを読み込む

  • [アーティクル]

リフレクションのみの読み込みコンテキストでは、他のプラットフォームや .NET の他のバージョン用にコンパイルされたアセンブリを検査できます。 このコンテキストに読み込まれたコードは検査のみ可能で、実行できません。 つまり、コンストラクターを実行できないので、オブジェクトは作成できません。 また、コードを実行できないため、依存関係は自動的には読み込まれません。 依存関係を検査する必要がある場合は、依存関係を独自に読み込む必要があります。

リフレクションのみの読み込みのコンテキストにアセンブリを読み込むには

  1. 表示名が指定されたアセンブリを読み込むには、ReflectionOnlyLoad(String) メソッド オーバーロードを使用し、パスが指定されたアセンブリを読み込むには、ReflectionOnlyLoadFrom メソッドを使用します。 アセンブリがバイナリ イメージの場合は、ReflectionOnlyLoad(Byte[]) メソッド オーバーロードを使用します。

    Note

    リフレクションのみのコンテキストを使用して、実行コンテキストのバージョン以外の .NET Framework のバージョンから mscorlib.dll のバージョンを読み込むことはできません。

  2. アセンブリに依存関係がある場合、ReflectionOnlyLoad メソッドは依存関係を読み込みません。 依存関係を検査する必要がある場合は、依存関係を独自に読み込む必要があります。

  3. アセンブリの ReflectionOnly プロパティを使用して、アセンブリをリフレクションのみのコンテキストに読み込むかどうかを決定します。

  4. アセンブリまたはアセンブリ内の型に属性が適用されている場合は、CustomAttributeData クラスを使用してこれらの属性を検査し、リフレクションのみのコンテキストでコードが実行されないようにします。 CustomAttributeData.GetCustomAttributes メソッドの適切なオーバーロードを使用して、アセンブリ、メンバー、モジュール、またはパラメーターに適用されている属性を表す CustomAttributeData オブジェクトを取得します。

    Note

    アセンブリまたはそのコンテンツに適用されている属性は、そのアセンブリで定義されている場合もあれば、リフレクションのみのコンテキストに読み込まれた別のアセンブリで定義されている場合もあります。 属性がどこに定義されているかを事前に確認する方法はありません。

例

リフレクションのみのコンテキストに読み込まれたアセンブリに適用されている属性を検査する方法を以下のコード例に示します。

このコード例では、2 つのコンストラクターと 1 つのプロパティでカスタム属性を定義しています。 この属性は、アセンブリ、アセンブリで宣言された型、型のメソッド、メソッドのパラメーターに適用されます。 このコード例を実行すると、アセンブリがそれ自体をリフレクションのみのコンテキストに読み込み、アセンブリとそれに含まれている型およびメンバーに適用されているカスタム属性に関する情報を表示します。

Note

コード例を簡素にするために、アセンブリがそれ自体を読み込んで検査します。 通常、同じアセンブリが実行コンテキストとリフレクションのみのコンテキストの両方に読み込まれることはありません。

using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/

using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/

Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly: Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() {"String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3"}, _
         Note:="This is a note on the class.", _
         Numbers:=New Integer() {53, 57, 59})> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

関連項目