Compartilhar via

Low-Lock Techniques in action: Implementing a Reader-Writer lock

  • Artigo

In my article What Every Dev Must Know About Multithreaded Apps I discuss the fundamental principles of using locks correctly.  In that article I strongly encourage the use of reader-writer locks because these locks create the protection you need (insuring that readers and writers don't conflict), while potentially allowing significantly more concurrency to take place (by allowing multiple readers to enter the lock simultaneously).    I did not have space in that article to discuss reader-writer locks in detail however.  I would like to start correcting that here.

The .NET Runtime implementation of a reader-writer lock is System.Threading.ReaderWriterLock.  It is really a pretty simple API at its heart (ignore stuff about LockCookies, it is there to support nesting of locks, which you should probably avoid anyway).  Here is a sample use

MyReaderWriterLock myLock = new MyReaderWriterLock();

myLock.AcquireReaderLock(Timeout.Infinite);
    // No writers can be in here (AquireWriterLock will block)
myLock.ReleaseReaderLock();

myLock.AcquireWriterLock(Timeout.Infinite);
    // No readers or other writers can be in here (Aquire*Lock blocks)
myLock.ReleaseWriterLock();

It is pretty straightforward to convert a program from using ordinary locks into using reader-writer locks (for those blocks that only read use AcquireReaderLock, otherwise use AquireWriterLock).

This is all very nice.  Unfortunately, there is a problem.  The current .NET Runtime implementation of ReaderWriterLock is about 8 times slower than System.Monitor (normal locks), in the common case where there is no lock contention.   This is quite unfortunate, as it acts as a disincentive for doing the right thing (and using reader-writer locks).  Microsoft is likely to fix this in the next release, however what do you do in the mean time?

Implementing a Reader-Writer Lock

The obvious answer is to implement an efficient 'drop in' version of ReaderWriterLock that you can use until Microsoft provides an better one.  This is what this article is all about.  Sadly, if our goal is to be as efficient as System.Montor, we can't use the standard locking protocol to implement a Reader-Writer Lock since every operation would have to lock and unlock, making it at least twice as slow as System.Monitor.  Thus we are forced to look into 'Low Lock Techniques', for an answer.   

In my article Understand the Impact of Low-Lock Techniques in Multithreaded Apps I list the techniques that if used very carefully, can sometimes be applied to do very efficient multi-threaded synchronization. I also mention that these techniques should only be used when the use of standard locks are problematic (usually because of performance issues). Reader-Writer locks fall into this problematic cataegory.

Possible Low lock techniques to use

In the article the techniques are listed in order of decreasing utility, and are

  1. Avoid locks on reads
  2. Spin Locks
  3. Raw Interlocked operations
  4. Lazyinit

Because the important APIs for a reader-writer lock always do an update, technique 1 is not applicable. Thus our best bet is Spin locks (note the later two techniques are not NEARLY as useful as the first two).  

Implementing a spin locks

It turns out that spin locks have some very nice properties. Namely they ARE locks, so all the nice properties of locks apply (once you take the lock you have mutual exclusion and reasoning about the program gets MUCH easier). They are also efficient (one interlocked operation per Enter-Exit pair). Thus we should be able to implement a Reader-writer lock with only one interlocked operation per method call, which is the same as System.Monitor (which also has one interlocked operation per method call).  

Please refer to the code attached to this post readerWriterDemo.cs. The first class is the spin lock. It has an 'Enter' and 'Exit' API. For more information on spin locks see my low-lock article or Jeff Richter's article Concurrent Affairs.  The implementation in readerWriterDemo.cs deals with all the subtle details you need to worry about.  It might need some tuning on how long it spins, but otherwise it is a very respectable implementation and you should feel free to use it if you need a spin lock yourself.   The only caveat I curretly have is that I have commented out calls to Thread.BeginCriticalRegion and Thread.EndCriticalRegion because they are relatively expensive (they make my perf numbers look bad), and is only needed in environments like SQL Server where threads may be aborted at any instant.  If a thread is aborted while the spin lock is held, the SQL Server host  wants to know so that it can kill the entire appdomain instead of just the thread.   If you are not in SQL Server you can get away without this.

Before using the spin lock, we need to confirm that our read-writer lock is a good candidate for its use.  To be a good candidate is must be the case that the time the lock is held is very short (measured in at most dozens of instructions).   We believe that this is the case since all of our API for the reader-writer lock do little and are perf critical, so the code paths NEED to be short.  However after we get our implementation we need to confirm that we don't have rare paths that might hold the lock for a long time.  It turns out with a bit of work we can make certain this is the case. 

Implementing a reader-writer lock with the spin lock

With a spin lock in hand, writing the reader-writer lock is not too much code (~ 150 lines, with comments), and hopefully is easy to understand.  Every API takes a lock, does work, and leaves.  To deal with the case where you must wait, we need OS structures to wait on (eg ManualResetEvent, AutoResetEvent).   When a ManualResetEvent is 'Set' all threads waiting will wake up.  This is appropriate for readers.  For writers, it makes more sense to only wake up the first thread, and this is what AutoResetEvent does.   The code has a lot of comments, so please take a look.     There are actually a lot of subtleties to think about (what happens in various error conditions, what APIs can fail, how efficient the lock is in various scenarios, how long we are holding the spin lock ...).  I point out some of these subtleties in comments, however the really important point is that the code itself is short and straightforward.  This is CRITICAL because the more code you have, the more difficult it is to confirm the code works in all the subtle cases.  It pays to keep things simple. 

Performance Results of the reader-writer lock

If you run the program, it will measure the performance of an Enter/Exit pair.  Here is what I got. 

10Meg Enter/Exit 371.6953 msec = 59.61 CPU clocks per Enter/Exit
10Meg RW Locks (.NET library) 3175.8594 msec = 8.5X monitor time
10Meg New RW Locks 428.8234 msec = 1.2X monitor time

As you can see, on my machine, the .NET library is 8.5X slower than System.Monitor, but the new RW locks are only 20% slower.    With some more tuning I suspect I can get even closer, however it will make the code more complicated, so I don't want to do that in this published code (cleanliness is worth something). 

As written, the lock has the property that if a writer is waiting for the locks, new readers can't come in and block it indefinitely.  Instead the readers wait until all the other readers drain, and the writer gets its turn.  The lock is unfair in the sense that when a lock is released it is not guaranteed that the first waiter gets the lock.   Thus starvation is possible (however unlikely).  It turns out that fairness causes performance issues (I will discuss in a later blog), so the current unfair protocol has better performance characteristics in almost all cases.   It is not too hard to change the implementation to be fair, and I might take that up in a later blog (please request it if you are interested).  

The lock as written is also not reentrant.  It is relatively easy and efficient to add this (although it is not clear this feature is a good idea), and I show how to do that too (please request it if you are interested). 

The code is really worth looking at carefully and I encourage you to do so.  It is small enough that you can understand the intent quickly, but there are many scenarios to think about.  

Recap

What are the take-aways?

  1. Use reader-writer locks as suggested in my first article.  If lock perf is a problem, take the implementation here as a 'drop in' replacement for the .NET System.ReaderWriterLock.  Feel free to use this implementation until Microsoft fixes the version in its library. 
  2. Spin-locks are a really valuable low lock technique.   There were used here to make a clean, simple but efficient reader-writer lock written competely in managed code.   This lock is significantlysimpler than most implementations I have seen, yet is clost to optimal.  The reason for this is that the use of spin locks GREATLY simplifies the design and analysis of the lock, without sacrificing performance.   Feel free to use the Spin lock implementation show here to make other high performance concurrent constructs. 
  3. Even something as simple as a Reader-Writer lock has subtleties about its behavior (especially when you factor in performance concerns).   Keeping it simple really pays off here. 

readerWriterDemo.cs

Comments

  • Anonymous
    March 28, 2006
    Vance, in your ReaderWriterLock sample use, is your comment "// No readers or other writers can be in here." suggestiong that another  myLock.AcquireWriterLock(...) call would block?

  • Anonymous
    March 28, 2006
    Vance, are you suggesting by the comment "// No readers or other writers can be in here." in the ReaderWriterLock sample use that adding another call to myLock.AcquireWriterLock(...) before myLock.ReleaseWriterLock() would block or throw an exception?

  • Anonymous
    March 28, 2006
    Peter:

    The // No readers or other writers can be in here comment does mean you indicate, that a call to myLock.AquireWriterLock or myLock.AquireReaderLock will block (wait), until the lock is released.  

  • Anonymous
    March 28, 2006
    Vance, the documentation for ReaderWriterLock.AcquireWriterLock states: "AcquireWriterLock supports recursive writer-lock requests. That is, a thread can call AcquireWriterLock multiple times, which increments the lock count each time. ... Recursive lock requests are always granted immediately, without placing the requesting thread in the writer queue."  So, adding another myLockAcquireWriter(...) before myLock.ReleaseWriterLock() will never block.  Your new comment should say AcquireReaderLock() blocks not Acquire*Lock() blocks.

    Of course, that presupposes a matching ReleaseWriterLock() is added to any additional AcquireWriterLock()...

  • Anonymous
    March 28, 2006
    A quick test of:

    MyReaderWriterLock myLock = new MyReaderWriterLock();

    myLock.AcquireWriterLock(Timeout.Infinite);
    myLock.AcquireWriterLock(Timeout.Infinite);
    myLock.ReleaseWriterLock();
    myLock.ReleaseWriterLock();

    confirms this.

  • Anonymous
    March 28, 2006
    Peter:

    Yes, you are correct that the current implementation of MyReaderWriterLock is NOT recurisve (reentrant).  This was last of the additions that I suggested was straightfoward to add.  You are correct that it is not a truely  drop-in replacement without it (but it is also not a drop-in replacement unless I implement all the other little-used APIs like lock upgrade).    

    If you are interesting in seeing the reentrant version, I just say so and I can blog about that next.
     

  • Anonymous
    March 28, 2006
    Sorry, my code sample should have used ReaderWriterLock, not MyReaderWriterLock.

  • Anonymous
    March 28, 2006
    Other problems with ReaderWriterLock is that the reads have higher priority than the writes which I think shouldn’t. If there are few readers locking an object and a writer wants to write then writer should be given higher priority which I think is not that is happening in BCL ReadWriterLock due to this there is a starvation. This is one of the reason few of them aren’t using readerwriter lock other than the performance issue that you have mentioned.

  • Anonymous
    March 28, 2006
    It would be very nice if the reader writer lock could be finished up to be a nearly-complete replacement for the built-in version.  Perhaps it can live on a GotDotNet workspace?

    Thanks!
    --Oren

  • Anonymous
    March 28, 2006
    Thanks for the very interesting post. There aren’t many sources on the net about low-lock techniques, so anything about them is welcome.
    Please, write more about it – though using low-lock techniques is not something that one happens to do everyday, for me, they are a very good way to learn some funny and obscure facts about the processor, the compiler and the .NET platform.
    For me, personally, it will be very interesting (and educating) to see all the versions of the ReaderWriterLock that you mentioned – the one that is reentrant and the one that is fair about the waiters – alongside your comments what differences (behavioral and performance)  the changes in the implementation bring.

  • Anonymous
    March 29, 2006
    In reply to snaveen's comment.

    In my experimentation I have personally confirmed that both System.Threading.ReaderWriterLock as well as the MyReaderWriteLock implementation will NOT starve writers.  If a writer is waiting for the lock, readers start to block also (They are logically 'behind' the writer in the queue), an so the writer gets the lock as soon as it can (when all the readers that currently hold the lock drain).  

    I am interested in any reasons why people don't use System.ThreadingReaderWriterLock.   Performance may be one of them (however, for other reasons it good to work in big enough chunks that lock performance is not an issue).  

  • Anonymous
    March 30, 2006
    In my last post I posted readerWriterDemo.cs which is an implementation of a Reader-Writer lock.  ...

  • Anonymous
    May 15, 2006
    Well I think it's raining ReaderWriterLocks this month!  Jeff Richter has an article on MSDN that...

  • Anonymous
    October 11, 2008
    Locking code Monitor.TryEnter, lock, using, and Deadlock Jeffrey Richter has an article on why the ReaderWriterLock isn't the best option: Low-Lock Techniques in action: Implementing a Reader-Writer lock Analysis of Reader-Writer lock...

  • Anonymous
    June 12, 2009
    PingBack from http://jachman.wordpress.com/2009/06/13/how-to-manage-control-states-in-silverlight-applications/

  • Anonymous
    August 06, 2011
    This simple code fails on assertion MyReaderWriterLock l = new MyReaderWriterLock(); l.AcquireWriterLock(Timeout.Infinite); l.ReleaseWriterLock(); I guess Debug.Assert(numUpgradeWaiters > 0) is wrong. Must be numUpgradeWaiters == 0.

  • Anonymous
    May 30, 2014
    Can't find readerWriterDemo.cs anymore.