Classe System.Data.DataTable
Este artigo fornece observações complementares à documentação de referência para essa API.
A DataTable classe é um objeto central na biblioteca ADO.NET. Outros objetos que usam DataTable incluem o e o DataViewDataSet .
DataTable Os nomes de objeto diferenciam condicionalmente maiúsculas de minúsculas. Por exemplo, se uma for chamada "mydatatable" e outra for chamada "Mydatatable", uma cadeia de caracteres usada para procurar uma DataTable das tabelas será considerada sensível a maiúsculas e minúsculas. No entanto, se "mydatatable" existir e "Mydatatable" não, a cadeia de caracteres de pesquisa será considerada como diferenciando maiúsculas de minúsculas. Um DataSet pode conter dois DataTable objetos que têm o mesmo TableName valor de propriedade, mas valores de propriedade diferentes Namespace . Para obter mais informações sobre como trabalhar com DataTable objetos, consulte Criando uma DataTable.
Se você estiver criando um DataTable programaticamente, primeiro deverá definir seu esquema adicionando DataColumn objetos ao DataColumnCollection (acessado por meio da Columns propriedade). Para obter mais informações sobre como adicionar DataColumn objetos, consulte Adicionando colunas a uma DataTable.
Para adicionar linhas a um , você deve primeiro usar o NewRow método para retornar um DataTablenovo DataRow objeto. O NewRow método retorna uma linha com o esquema do DataTable, conforme definido pelo DataColumnCollection. O número máximo de linhas que uma DataTable lata pode armazenar é 16.777.216. Para obter mais informações, consulte Adicionando dados a uma DataTable.
O DataTable também contém uma coleção de Constraint objetos que podem ser usados para garantir a integridade dos dados. Para obter mais informações, consulte Restrições de DataTable.
Há muitos DataTable eventos que podem ser usados para determinar quando as alterações são feitas em uma tabela. Elas incluem RowChanged, RowChanging, RowDeleting e RowDeleted. Para obter mais informações sobre os eventos que podem ser usados com um DataTable, consulte Manipulando eventos DataTable.
Quando uma instância de é criada, algumas das propriedades de DataTable leitura/gravação são definidas como valores iniciais. Para obter uma lista desses valores, consulte o DataTable construtor.
Observação
Os DataSet objetos e DataTable herdam e MarshalByValueComponent oferecem suporte à ISerializable interface para comunicação remota do .NET. Esses são os únicos objetos ADO.NET que você pode usar para comunicação remota do .NET.
Considerações de segurança
Para obter informações sobre a segurança DataSet e DataTable, consulte Diretrizes de segurança.
Exemplos
Este exemplo demonstra como criar uma DataTable manualmente com definições de esquema específicas:
- Crie várias DataTables e defina as colunas iniciais.
- Crie as restrições da tabela.
- Insira os valores e exiba as tabelas.
- Crie as colunas de expressão e exiba as tabelas.
using System;
using System.Data;
class Program
{
static void Main(string[] args)
{
// Create two tables and add them into the DataSet
DataTable orderTable = CreateOrderTable();
DataTable orderDetailTable = CreateOrderDetailTable();
DataSet salesSet = new DataSet();
salesSet.Tables.Add(orderTable);
salesSet.Tables.Add(orderDetailTable);
// Set the relations between the tables and create the related constraint.
salesSet.Relations.Add("OrderOrderDetail", orderTable.Columns["OrderId"], orderDetailTable.Columns["OrderId"], true);
Console.WriteLine("After creating the foreign key constriant, you will see the following error if inserting order detail with the wrong OrderId: ");
try
{
DataRow errorRow = orderDetailTable.NewRow();
errorRow[0] = 1;
errorRow[1] = "O0007";
orderDetailTable.Rows.Add(errorRow);
}
catch (Exception e)
{
Console.WriteLine(e.Message);
}
Console.WriteLine();
// Insert the rows into the table
InsertOrders(orderTable);
InsertOrderDetails(orderDetailTable);
Console.WriteLine("The initial Order table.");
ShowTable(orderTable);
Console.WriteLine("The OrderDetail table.");
ShowTable(orderDetailTable);
// Use the Aggregate-Sum on the child table column to get the result.
DataColumn colSub = new DataColumn("SubTotal", typeof(Decimal), "Sum(Child.LineTotal)");
orderTable.Columns.Add(colSub);
// Compute the tax by referencing the SubTotal expression column.
DataColumn colTax = new DataColumn("Tax", typeof(Decimal), "SubTotal*0.1");
orderTable.Columns.Add(colTax);
// If the OrderId is 'Total', compute the due on all orders; or compute the due on this order.
DataColumn colTotal = new DataColumn("TotalDue", typeof(Decimal), "IIF(OrderId='Total',Sum(SubTotal)+Sum(Tax),SubTotal+Tax)");
orderTable.Columns.Add(colTotal);
DataRow row = orderTable.NewRow();
row["OrderId"] = "Total";
orderTable.Rows.Add(row);
Console.WriteLine("The Order table with the expression columns.");
ShowTable(orderTable);
Console.WriteLine("Press any key to exit.....");
Console.ReadKey();
}
private static DataTable CreateOrderTable()
{
DataTable orderTable = new DataTable("Order");
// Define one column.
DataColumn colId = new DataColumn("OrderId", typeof(String));
orderTable.Columns.Add(colId);
DataColumn colDate = new DataColumn("OrderDate", typeof(DateTime));
orderTable.Columns.Add(colDate);
// Set the OrderId column as the primary key.
orderTable.PrimaryKey = new DataColumn[] { colId };
return orderTable;
}
private static DataTable CreateOrderDetailTable()
{
DataTable orderDetailTable = new DataTable("OrderDetail");
// Define all the columns once.
DataColumn[] cols =
{
new DataColumn("OrderDetailId", typeof(Int32)),
new DataColumn("OrderId", typeof(String)),
new DataColumn("Product", typeof(String)),
new DataColumn("UnitPrice", typeof(Decimal)),
new DataColumn("OrderQty", typeof(Int32)),
new DataColumn("LineTotal", typeof(Decimal), "UnitPrice*OrderQty")
};
orderDetailTable.Columns.AddRange(cols);
orderDetailTable.PrimaryKey = new DataColumn[] { orderDetailTable.Columns["OrderDetailId"] };
return orderDetailTable;
}
private static void InsertOrders(DataTable orderTable)
{
// Add one row once.
DataRow row1 = orderTable.NewRow();
row1["OrderId"] = "O0001";
row1["OrderDate"] = new DateTime(2013, 3, 1);
orderTable.Rows.Add(row1);
DataRow row2 = orderTable.NewRow();
row2["OrderId"] = "O0002";
row2["OrderDate"] = new DateTime(2013, 3, 12);
orderTable.Rows.Add(row2);
DataRow row3 = orderTable.NewRow();
row3["OrderId"] = "O0003";
row3["OrderDate"] = new DateTime(2013, 3, 20);
orderTable.Rows.Add(row3);
}
private static void InsertOrderDetails(DataTable orderDetailTable)
{
// Use an Object array to insert all the rows .
// Values in the array are matched sequentially to the columns, based on the order in which they appear in the table.
Object[] rows =
{
new Object[] { 1, "O0001", "Mountain Bike", 1419.5, 36 },
new Object[] { 2, "O0001", "Road Bike", 1233.6, 16 },
new Object[] { 3, "O0001", "Touring Bike", 1653.3, 32 },
new Object[] { 4, "O0002", "Mountain Bike", 1419.5, 24 },
new Object[] { 5, "O0002", "Road Bike", 1233.6, 12 },
new Object[] { 6, "O0003", "Mountain Bike", 1419.5, 48 },
new Object[] { 7, "O0003", "Touring Bike", 1653.3, 8 },
};
foreach (Object[] row in rows)
{
orderDetailTable.Rows.Add(row);
}
}
private static void ShowTable(DataTable table)
{
foreach (DataColumn col in table.Columns)
{
Console.Write("{0,-14}", col.ColumnName);
}
Console.WriteLine();
foreach (DataRow row in table.Rows)
{
foreach (DataColumn col in table.Columns)
{
if (col.DataType.Equals(typeof(DateTime)))
Console.Write("{0,-14:d}", row[col]);
else if (col.DataType.Equals(typeof(Decimal)))
Console.Write("{0,-14:C}", row[col]);
else
Console.Write("{0,-14}", row[col]);
}
Console.WriteLine();
}
Console.WriteLine();
}
}
Imports System.Data
Class Program
Public Shared Sub Main(args As String())
' Create two tables and add them into the DataSet
Dim orderTable As DataTable = CreateOrderTable()
Dim orderDetailTable As DataTable = CreateOrderDetailTable()
Dim salesSet As New DataSet()
salesSet.Tables.Add(orderTable)
salesSet.Tables.Add(orderDetailTable)
' Set the relations between the tables and create the related constraint.
salesSet.Relations.Add("OrderOrderDetail", orderTable.Columns("OrderId"), orderDetailTable.Columns("OrderId"), True)
Console.WriteLine("After creating the foreign key constriant, you will see the following error if inserting order detail with the wrong OrderId: ")
Try
Dim errorRow As DataRow = orderDetailTable.NewRow()
errorRow(0) = 1
errorRow(1) = "O0007"
orderDetailTable.Rows.Add(errorRow)
Catch e As Exception
Console.WriteLine(e.Message)
End Try
Console.WriteLine()
' Insert the rows into the table
InsertOrders(orderTable)
InsertOrderDetails(orderDetailTable)
Console.WriteLine("The initial Order table.")
ShowTable(orderTable)
Console.WriteLine("The OrderDetail table.")
ShowTable(orderDetailTable)
' Use the Aggregate-Sum on the child table column to get the result.
Dim colSub As New DataColumn("SubTotal", GetType([Decimal]), "Sum(Child.LineTotal)")
orderTable.Columns.Add(colSub)
' Compute the tax by referencing the SubTotal expression column.
Dim colTax As New DataColumn("Tax", GetType([Decimal]), "SubTotal*0.1")
orderTable.Columns.Add(colTax)
' If the OrderId is 'Total', compute the due on all orders; or compute the due on this order.
Dim colTotal As New DataColumn("TotalDue", GetType([Decimal]), "IIF(OrderId='Total',Sum(SubTotal)+Sum(Tax),SubTotal+Tax)")
orderTable.Columns.Add(colTotal)
Dim row As DataRow = orderTable.NewRow()
row("OrderId") = "Total"
orderTable.Rows.Add(row)
Console.WriteLine("The Order table with the expression columns.")
ShowTable(orderTable)
Console.WriteLine("Press any key to exit.....")
Console.ReadKey()
End Sub
Private Shared Function CreateOrderTable() As DataTable
Dim orderTable As New DataTable("Order")
' Define one column.
Dim colId As New DataColumn("OrderId", GetType([String]))
orderTable.Columns.Add(colId)
Dim colDate As New DataColumn("OrderDate", GetType(DateTime))
orderTable.Columns.Add(colDate)
' Set the OrderId column as the primary key.
orderTable.PrimaryKey = New DataColumn() {colId}
Return orderTable
End Function
Private Shared Function CreateOrderDetailTable() As DataTable
Dim orderDetailTable As New DataTable("OrderDetail")
' Define all the columns once.
Dim cols As DataColumn() = {New DataColumn("OrderDetailId", GetType(Int32)), New DataColumn("OrderId", GetType([String])), New DataColumn("Product", GetType([String])), New DataColumn("UnitPrice", GetType([Decimal])), New DataColumn("OrderQty", GetType(Int32)), New DataColumn("LineTotal", GetType([Decimal]), "UnitPrice*OrderQty")}
orderDetailTable.Columns.AddRange(cols)
orderDetailTable.PrimaryKey = New DataColumn() {orderDetailTable.Columns("OrderDetailId")}
Return orderDetailTable
End Function
Private Shared Sub InsertOrders(orderTable As DataTable)
' Add one row once.
Dim row1 As DataRow = orderTable.NewRow()
row1("OrderId") = "O0001"
row1("OrderDate") = New DateTime(2013, 3, 1)
orderTable.Rows.Add(row1)
Dim row2 As DataRow = orderTable.NewRow()
row2("OrderId") = "O0002"
row2("OrderDate") = New DateTime(2013, 3, 12)
orderTable.Rows.Add(row2)
Dim row3 As DataRow = orderTable.NewRow()
row3("OrderId") = "O0003"
row3("OrderDate") = New DateTime(2013, 3, 20)
orderTable.Rows.Add(row3)
End Sub
Private Shared Sub InsertOrderDetails(orderDetailTable As DataTable)
' Use an Object array to insert all the rows .
' Values in the array are matched sequentially to the columns, based on the order in which they appear in the table.
Dim rows As [Object]() = {New [Object]() {1, "O0001", "Mountain Bike", 1419.5, 36}, New [Object]() {2, "O0001", "Road Bike", 1233.6, 16}, New [Object]() {3, "O0001", "Touring Bike", 1653.3, 32}, New [Object]() {4, "O0002", "Mountain Bike", 1419.5, 24}, New [Object]() {5, "O0002", "Road Bike", 1233.6, 12}, New [Object]() {6, "O0003", "Mountain Bike", 1419.5, 48}, _
New [Object]() {7, "O0003", "Touring Bike", 1653.3, 8}}
For Each row As [Object]() In rows
orderDetailTable.Rows.Add(row)
Next
End Sub
Private Shared Sub ShowTable(table As DataTable)
For Each col As DataColumn In table.Columns
Console.Write("{0,-14}", col.ColumnName)
Next
Console.WriteLine()
For Each row As DataRow In table.Rows
For Each col As DataColumn In table.Columns
If col.DataType.Equals(GetType(DateTime)) Then
Console.Write("{0,-14:d}", row(col))
ElseIf col.DataType.Equals(GetType([Decimal])) Then
Console.Write("{0,-14:C}", row(col))
Else
Console.Write("{0,-14}", row(col))
End If
Next
Console.WriteLine()
Next
Console.WriteLine()
End Sub
End Class
