2.2.4.42.2 Response

 SMB_Parameters
   {
   UCHAR  WordCount;
   Words
     {
     UCHAR  AndXCommand;
     UCHAR  AndXReserved;
     USHORT AndXOffset;
     USHORT Available;
     USHORT DataCompactionMode;
     USHORT Reserved1;
     USHORT DataLength;
     USHORT DataOffset;
     USHORT Reserved2[5];
     }
   }
 SMB_Data
   {
   USHORT ByteCount;
   Bytes
     {
     UCHAR Pad[] (optional);
     UCHAR Data[DataLength];
     }
   }
            

SMB_Parameters (25 bytes):

0	1	2	3	4	5	6	7	8	9	1 0	1	2	3	4	5	6	7	8	9	2 0	1	2	3	4	5	6	7	8	9	3 0	1
WordCount								Words (24 bytes)
...
...
...

WordCount (1 byte): This field MUST be 0x0C.

Words (24 bytes):

0	1	2	3	4	5	6	7	8	9	1 0	1	2	3	4	5	6	7	8	9	2 0	1	2	3	4	5	6	7	8	9	3 0	1
AndXCommand								AndXReserved								AndXOffset
Available																DataCompactionMode
Reserved1																DataLength
DataOffset																Reserved2
...
...

AndXCommand (1 byte): The command code for the next SMB command in the packet. This value MUST be set to SMB_COM_NO_ANDX_COMMAND (section 2.2.4.75) (0xFF) if there are no additional SMB command responses in the server response packet.<58>

AndXReserved (1 byte): A reserved field. This MUST be set to 0x00 when this response is sent, and the client MUST ignore this field.

AndXOffset (2 bytes): This field MUST be set to the offset in bytes from the start of the SMB Header (section 2.2.3.1) to the start of the WordCount field in the next SMB command response in this packet. This field is valid only if the AndXCommand field is not set to SMB_COM_NO_ANDX_COMMAND (0xFF). If AndXCommand is SMB_COM_NO_ANDX_COMMAND, this field MUST be ignored by the client.<59>

Available (2 bytes): This field is valid when reading from named pipes. This field indicates the number of bytes remaining to be read after the requested read was completed.

DataCompactionMode (2 bytes): Reserved and SHOULD be 0x0000.

Reserved1 (2 bytes): This field MUST be 0x0000.

DataLength (2 bytes): The number of data bytes included in the response. If this value is less than the value in the Request.SMB_Parameters.MaxCountOfBytesToReturn field, it indicates that the read operation has reached the end of the file (EOF).

DataOffset (2 bytes): The offset in bytes from the header of the read data.

Reserved2 (10 bytes): Reserved. All entries MUST be 0x0000. The last 5 words are reserved in order to make the SMB_COM_READ_ANDX Response (section 2.2.4.42.2) the same size as the SMB_COM_WRITE_ANDX Response (section 2.2.4.43.2).

SMB_Data (variable):

0	1	2	3	4	5	6	7	8	9	1 0	1	2	3	4	5	6	7	8	9	2 0	1	2	3	4	5	6	7	8	9	3 0	1
ByteCount																Bytes (variable)
...

ByteCount (2 bytes): This field MUST be greater than or equal to 0x0000.

Bytes (variable):

0	1	2	3	4	5	6	7	8	9	1 0	1	2	3	4	5	6	7	8	9	2 0	1	2	3	4	5	6	7	8	9	3 0	1
Pad								Data (variable)
...

Pad (1 byte): This field is optional. When using the NT LAN Manager dialect, this field can be used to align the Data field to a 16-bit boundary relative to the start of the SMB Header. If Unicode strings are being used, this field MUST be present. When used, this field MUST be one padding byte long.

Data (variable): The actual bytes read in response to the request.

Error Codes