共用方式為


使用滑鼠輸入

本節涵蓋與滑鼠輸入相關聯的工作。

追蹤滑鼠游標

應用程式通常會執行涉及追蹤滑鼠游標位置的工作。 例如,大部分的繪圖應用程式會在繪圖作業期間追蹤滑鼠游標的位置,讓使用者藉由拖曳滑鼠,在視窗的工作區中繪製。 Word處理應用程式也會追蹤游標,讓使用者按一下滑鼠並拖曳滑鼠來選取文字或文字區塊。

追蹤資料指標通常涉及處理 WM_LBUTTONDOWNWM_MOUSEMOVEWM_LBUTTONUP 訊息。 視窗會藉由檢查WM_LBUTTONDOWN訊息的lParam參數中提供的游標位置,判斷何時開始追蹤資料指標。 例如,只有在游標位於文字行時發生 WM_LBUTTONDOWN 訊息時,文字處理應用程式才會開始追蹤資料指標,但如果資料指標超過檔的結尾,則不會開始追蹤資料指標。

視窗會藉由處理在滑鼠移動時張貼至視窗的訊息 WM_MOUSEMOVE 資料流程,來追蹤游標的位置。 處理 WM_MOUSEMOVE 訊息通常牽涉到工作區中的重複繪製或繪圖作業。 例如,繪圖應用程式可能會在滑鼠移動時重複重新繪製線條。 視窗使用 WM_LBUTTONUP 訊息作為停止追蹤游標的訊號。

此外,應用程式可以呼叫 TrackMouseEvent 函式,讓系統傳送其他可用於追蹤資料指標的訊息。 當游標停留在特定時段的工作區上時,系統會張貼 WM_MOUSEHOVER 訊息。 當游標離開工作區時,它會張貼 WM_MOUSELEAVE 訊息。 WM_NCMOUSEHOVERWM_NCMOUSELEAVE訊息是非用戶端區域的對應訊息。

使用滑鼠繪製線條

本節中的範例示範如何追蹤滑鼠游標。 它包含視窗程式的一部分,可讓使用者藉由拖曳滑鼠,在視窗的工作區中繪製線條。

當視窗程式收到 WM_LBUTTONDOWN 訊息時,它會擷取滑鼠並儲存游標的座標,並使用座標做為線條的起點。 它也會使用 ClipCursor 函式,線上條繪製作業期間將游標限制在工作區。

在第一 個WM_MOUSEMOVE 訊息期間,視窗程式會從起點到游標的目前位置繪製一行。 在後續 WM_MOUSEMOVE 訊息期間,視窗程式會使用反轉的畫筆色彩來繪製上一行,以清除前一行。 然後,它會從起點到游標的新位置繪製新的線條。

WM_LBUTTONUP訊息會發出繪圖作業結尾的訊號。 視窗程式會釋放滑鼠擷取,並從工作區釋放滑鼠。

LRESULT APIENTRY MainWndProc(HWND hwndMain, UINT uMsg, WPARAM wParam, LPARAM lParam) 
{ 
    HDC hdc;                       // handle to device context 
    RECT rcClient;                 // client area rectangle 
    POINT ptClientUL;              // client upper left corner 
    POINT ptClientLR;              // client lower right corner 
    static POINTS ptsBegin;        // beginning point 
    static POINTS ptsEnd;          // new endpoint 
    static POINTS ptsPrevEnd;      // previous endpoint 
    static BOOL fPrevLine = FALSE; // previous line flag 
 
    switch (uMsg) 
    { 
       case WM_LBUTTONDOWN: 
 
            // Capture mouse input. 
 
            SetCapture(hwndMain); 
 
            // Retrieve the screen coordinates of the client area, 
            // and convert them into client coordinates. 
 
            GetClientRect(hwndMain, &rcClient); 
            ptClientUL.x = rcClient.left; 
            ptClientUL.y = rcClient.top; 
 
            // Add one to the right and bottom sides, because the 
            // coordinates retrieved by GetClientRect do not 
            // include the far left and lowermost pixels. 
 
            ptClientLR.x = rcClient.right + 1; 
            ptClientLR.y = rcClient.bottom + 1; 
            ClientToScreen(hwndMain, &ptClientUL); 
            ClientToScreen(hwndMain, &ptClientLR); 
 
            // Copy the client coordinates of the client area 
            // to the rcClient structure. Confine the mouse cursor 
            // to the client area by passing the rcClient structure 
            // to the ClipCursor function. 
 
            SetRect(&rcClient, ptClientUL.x, ptClientUL.y, 
                ptClientLR.x, ptClientLR.y); 
            ClipCursor(&rcClient); 
 
            // Convert the cursor coordinates into a POINTS 
            // structure, which defines the beginning point of the 
            // line drawn during a WM_MOUSEMOVE message. 
 
            ptsBegin = MAKEPOINTS(lParam); 
            return 0; 
 
        case WM_MOUSEMOVE: 
 
            // When moving the mouse, the user must hold down 
            // the left mouse button to draw lines. 
 
            if (wParam & MK_LBUTTON) 
            { 
 
                // Retrieve a device context (DC) for the client area. 
 
                hdc = GetDC(hwndMain); 
 
                // The following function ensures that pixels of 
                // the previously drawn line are set to white and 
                // those of the new line are set to black. 
 
                SetROP2(hdc, R2_NOTXORPEN); 
 
                // If a line was drawn during an earlier WM_MOUSEMOVE 
                // message, draw over it. This erases the line by 
                // setting the color of its pixels to white. 
 
                if (fPrevLine) 
                { 
                    MoveToEx(hdc, ptsBegin.x, ptsBegin.y, 
                        (LPPOINT) NULL); 
                    LineTo(hdc, ptsPrevEnd.x, ptsPrevEnd.y); 
                } 
 
                // Convert the current cursor coordinates to a 
                // POINTS structure, and then draw a new line. 
 
                ptsEnd = MAKEPOINTS(lParam); 
                MoveToEx(hdc, ptsBegin.x, ptsBegin.y, (LPPOINT) NULL); 
                LineTo(hdc, ptsEnd.x, ptsEnd.y); 
 
                // Set the previous line flag, save the ending 
                // point of the new line, and then release the DC. 
 
                fPrevLine = TRUE; 
                ptsPrevEnd = ptsEnd; 
                ReleaseDC(hwndMain, hdc); 
            } 
            break; 
 
        case WM_LBUTTONUP: 
 
            // The user has finished drawing the line. Reset the 
            // previous line flag, release the mouse cursor, and 
            // release the mouse capture. 
 
            fPrevLine = FALSE; 
            ClipCursor(NULL); 
            ReleaseCapture(); 
            return 0; 
 
        case WM_DESTROY: 
            PostQuitMessage(0); 
            break; 
 
        // Process other messages. 
    }
}
        

處理按兩下訊息

若要接收按兩下訊息,視窗必須屬於具有 CS_DBLCLKS 類別樣式的視窗類別。 您可以在註冊視窗類別時設定此樣式,如下列範例所示。

BOOL InitApplication(HINSTANCE hInstance) 
{ 
    WNDCLASS wc; 
 
    wc.style = CS_DBLCLKS | CS_HREDRAW | CS_VREDRAW; 
    wc.lpfnWndProc = (WNDPROC) MainWndProc; 
    wc.cbClsExtra = 0; 
    wc.cbWndExtra = 0; 
    wc.hInstance = hInstance; 
    wc.hIcon = LoadIcon(NULL, IDI_APPLICATION); 
    wc.hCursor = LoadCursor(NULL, IDC_IBEAM); 
    wc.hbrBackground = GetStockObject(WHITE_BRUSH); 
    wc.lpszMenuName = "MainMenu"; 
    wc.lpszClassName = "MainWClass"; 
 
    return RegisterClass(&wc); 
} 

按兩下訊息之前一律會加上按鈕向下訊息。 基於這個理由,應用程式通常會使用按兩下訊息來擴充在按鈕關閉訊息期間開始的工作。

選取文字行

本節中的範例取自簡單的文字處理應用程式。 它包含程式碼,可讓使用者按一下一行文字上的任何位置來設定插入號的位置,並選取 (醒目提示) 一行文字,方法是按兩下該行的任何位置。

LRESULT APIENTRY MainWndProc(HWND hwndMain, UINT uMsg, WPARAM wParam, LPARAM lParam) 
{ 
    HDC hdc;                     // handle to device context 
    TEXTMETRIC tm;               // font size data 
    int i, j;                    // loop counters 
    int cCR = 0;                 // count of carriage returns 
    char ch;                     // character from input buffer 
    static int nBegLine;         // beginning of selected line 
    static int nCurrentLine = 0; // currently selected line 
    static int nLastLine = 0;    // last text line 
    static int nCaretPosX = 0;   // x-coordinate of caret 
    static int cch = 0;          // number of characters entered 
    static int nCharWidth = 0;   // exact width of a character 
    static char szHilite[128];   // text string to highlight 
    static DWORD dwCharX;        // average width of characters 
    static DWORD dwLineHeight;   // line height 
    static POINTS ptsCursor;     // coordinates of mouse cursor 
    static COLORREF crPrevText;  // previous text color 
    static COLORREF crPrevBk;    // previous background color 
    static PTCHAR pchInputBuf;   // pointer to input buffer 
    static BOOL fTextSelected = FALSE; // text-selection flag 
    size_t * pcch;
    HRESULT hResult;
 
    switch (uMsg) 
    { 
        case WM_CREATE: 
 
            // Get the metrics of the current font. 
 
            hdc = GetDC(hwndMain); 
            GetTextMetrics(hdc, &tm); 
            ReleaseDC(hwndMain, hdc); 
 
            // Save the average character width and height. 
 
            dwCharX = tm.tmAveCharWidth; 
            dwLineHeight = tm.tmHeight; 
 
            // Allocate a buffer to store keyboard input. 
 
            pchInputBuf = (LPSTR) GlobalAlloc(GPTR, 
                BUFSIZE * sizeof(TCHAR)); 
 
            return 0; 
 
        case WM_CHAR: 
            switch (wParam) 
            { 
                case 0x08:  // backspace 
                case 0x0A:  // linefeed 
                case 0x1B:  // escape 
                    MessageBeep( (UINT) -1); 
                    return 0; 
 
                case 0x09:  // tab 
 
                    // Convert tabs to four consecutive spaces. 
 
                    for (i = 0; i < 4; i++) 
                        SendMessage(hwndMain, WM_CHAR, 0x20, 0); 
                    return 0; 
 
                case 0x0D:  // carriage return 
 
                    // Record the carriage return, and position the 
                    // caret at the beginning of the new line. 
 
                    pchInputBuf[cch++] = 0x0D; 
                    nCaretPosX = 0; 
                    nCurrentLine += 1; 
                    break; 
 
                default:    / displayable character 
 
                    ch = (char) wParam; 
                    HideCaret(hwndMain); 
 
                    // Retrieve the character's width, and display the 
                    // character. 
 
                    hdc = GetDC(hwndMain); 
                    GetCharWidth32(hdc, (UINT) wParam, (UINT) wParam, 
                        &nCharWidth); 
                    TextOut(hdc, nCaretPosX, 
                        nCurrentLine * dwLineHeight, &ch, 1); 
                    ReleaseDC(hwndMain, hdc); 
 
                    // Store the character in the buffer. 
 
                    pchInputBuf[cch++] = ch; 
 
                    // Calculate the new horizontal position of the 
                    // caret. If the new position exceeds the maximum, 
                    // insert a carriage return and reposition the 
                    // caret at the beginning of the next line. 
 
                    nCaretPosX += nCharWidth; 
                    if ((DWORD) nCaretPosX > dwMaxCharX) 
                    { 
                        nCaretPosX = 0; 
                        pchInputBuf[cch++] = 0x0D; 
                        ++nCurrentLine; 
                    } 
 
                    ShowCaret(hwndMain); 
 
                    break; 
            } 
            SetCaretPos(nCaretPosX, nCurrentLine * dwLineHeight); 
            nLastLine = max(nLastLine, nCurrentLine); 
            break; 
 
        // Process other messages. 
 
        case WM_LBUTTONDOWN: 
 
            // If a line of text is currently highlighted, redraw 
            // the text to remove the highlighting. 
 
            if (fTextSelected) 
            { 
                hdc = GetDC(hwndMain); 
                SetTextColor(hdc, crPrevText); 
                SetBkColor(hdc, crPrevBk);
                hResult = StringCchLength(szHilite, 128/sizeof(TCHAR), pcch);
                if (FAILED(hResult))
                {
                // TODO: write error handler
                } 
                TextOut(hdc, 0, nCurrentLine * dwLineHeight, 
                    szHilite, *pcch); 
                ReleaseDC(hwndMain, hdc); 
                ShowCaret(hwndMain); 
                fTextSelected = FALSE; 
            } 
 
            // Save the current mouse-cursor coordinates. 
 
            ptsCursor = MAKEPOINTS(lParam); 
 
            // Determine which line the cursor is on, and save 
            // the line number. Do not allow line numbers greater 
            // than the number of the last line of text. The 
            // line number is later multiplied by the average height 
            // of the current font. The result is used to set the 
            // y-coordinate of the caret. 
 
            nCurrentLine = min((int)(ptsCursor.y / dwLineHeight), 
                nLastLine); 
 
            // Parse the text input buffer to find the first 
            // character in the selected line of text. Each 
            // line ends with a carriage return, so it is possible 
            // to count the carriage returns to find the selected 
            // line. 
 
            cCR = 0; 
            nBegLine = 0; 
            if (nCurrentLine != 0) 
            { 
                for (i = 0; (i < cch) && 
                        (cCR < nCurrentLine); i++) 
                { 
                    if (pchInputBuf[i] == 0x0D) 
                        ++cCR; 
                } 
                nBegLine = i; 
            } 
 
            // Starting at the beginning of the selected line, 
            // measure  the width of each character, summing the 
            // width with each character measured. Stop when the 
            // sum is greater than the x-coordinate of the cursor. 
            // The sum is used to set the x-coordinate of the caret. 
 
            hdc = GetDC(hwndMain); 
            nCaretPosX = 0; 
            for (i = nBegLine; 
                (pchInputBuf[i] != 0x0D) && (i < cch); i++) 
            { 
                ch = pchInputBuf[i]; 
                GetCharWidth32(hdc, (int) ch, (int) ch, &nCharWidth); 
                if ((nCaretPosX + nCharWidth) > ptsCursor.x) break; 
                else nCaretPosX += nCharWidth; 
            } 
            ReleaseDC(hwndMain, hdc); 
 
            // Set the caret to the user-selected position. 
 
            SetCaretPos(nCaretPosX, nCurrentLine * dwLineHeight); 
            break; 
 
        case WM_LBUTTONDBLCLK: 
 
            // Copy the selected line of text to a buffer. 
 
            for (i = nBegLine, j = 0; (pchInputBuf[i] != 0x0D) && 
                    (i < cch); i++) 
            {
                szHilite[j++] = pchInputBuf[i]; 
            }
            szHilite[j] = '\0'; 
 
            // Hide the caret, invert the background and foreground 
            // colors, and then redraw the selected line. 
 
            HideCaret(hwndMain); 
            hdc = GetDC(hwndMain); 
            crPrevText = SetTextColor(hdc, RGB(255, 255, 255)); 
            crPrevBk = SetBkColor(hdc, RGB(0, 0, 0));
            hResult = StringCchLength(szHilite, 128/sizeof(TCHAR), pcch);
            if (FAILED(hResult))
            {
            // TODO: write error handler
            } 
            TextOut(hdc, 0, nCurrentLine * dwLineHeight, szHilite, *pcch); 
            SetTextColor(hdc, crPrevText); 
            SetBkColor(hdc, crPrevBk); 
            ReleaseDC(hwndMain, hdc); 
 
            fTextSelected = TRUE; 
            break; 

            // Process other messages. 

        default: 
            return DefWindowProc(hwndMain, uMsg, wParam, lParam); 
    } 
    return NULL; 
} 

在檔中搭配内嵌物件使用滑鼠滾輪

此範例假設 Microsoft Word檔,其中包含各種内嵌物件:

  • Microsoft Excel 試算表
  • 內嵌清單方塊控制項,可捲動以回應滾輪
  • 未回應滾輪的內嵌文字方塊控制項

MSH_MOUSEWHEEL訊息一律會傳送至 Microsoft Word的主視窗。 即使內嵌試算表為使用中,也是如此。 下表說明如何根據焦點處理MSH_MOUSEWHEEL訊息。

焦點位於 處理方式如下
Word檔 Word捲動文件視窗。
內嵌 Excel 試算表 Word將訊息張貼至 Excel。 您必須決定內嵌應用程式是否應該回應訊息。
內嵌控制項 應用程式將訊息傳送至具有焦點的內嵌控制項,並檢查傳回碼以查看控制項是否已處理它。 如果控制項未處理它,則應用程式應該捲動文件視窗。 例如,如果使用者按一下清單方塊,然後變換滾輪,該控制項會捲動以回應滾輪旋轉。 如果使用者按一下文字方塊,然後旋轉滾輪,整個檔就會捲動。

 

下列範例示範應用程式如何處理兩個滾輪訊息。

/************************************************
* this code deals with MSH_MOUSEWHEEL
*************************************************/
#include "zmouse.h"

//
// Mouse Wheel rotation stuff, only define if we are
// on a version of the OS that does not support
// WM_MOUSEWHEEL messages.
//
#ifndef WM_MOUSEWHEEL
#define WM_MOUSEWHEEL WM_MOUSELAST+1 
    // Message ID for IntelliMouse wheel
#endif

UINT uMSH_MOUSEWHEEL = 0;   // Value returned from
                            // RegisterWindowMessage()

/**************************************************

INT WINAPI WinMain(
         HINSTANCE hInst, 
         HINSTANCE hPrevInst, 
         LPSTR lpCmdLine, 
         INT nCmdShow)
{
    MSG msg;
    BOOL bRet;

    if (!InitInstance(hInst, nCmdShow))
        return FALSE;

    //
    // The new IntelliMouse uses a Registered message to transmit
    // wheel rotation info. So register for it!
 
    uMSH_MOUSEWHEEL =
     RegisterWindowMessage(MSH_MOUSEWHEEL); 
    if ( !uMSH_MOUSEWHEEL )
    {
        MessageBox(NULL,"
                   RegisterWindowMessag Failed!",
                   "Error",MB_OK);
        return msg.wParam;
    }
    
    while (( bRet = GetMessage(&msg, NULL, 0, 0)) != 0)
    {
        if (bRet == -1)
        {
            // handle the error and possibly exit
        }
        else
        {
            if (!TranslateAccelerator(ghwndApp,
                                      ghaccelTable,
                                      &msg))
            {
                TranslateMessage(&msg);
                DispatchMessage(&msg);
            }
        }
    }

    return msg.wParam;
}

/************************************************
* this code deals with WM_MOUSEWHEEL
*************************************************/
LONG APIENTRY MainWndProc(
    HWND hwnd,
    UINT msg,
    WPARAM wParam,
    LPARAM lParam)
{
    static int nZoom = 0;
    

    switch (msg)
    {
        //
        // Handle Mouse Wheel messages generated
        // by the operating systems that have built-in
        // support for the WM_MOUSEWHEEL message.
        //

        case WM_MOUSEWHEEL:
            ((short) HIWORD(wParam)< 0) ? nZoom-- : nZoom++;

            //
            // Do other wheel stuff...
            //

            break;

        default:
            //
            // uMSH_MOUSEWHEEL is a message registered by
            // the mswheel dll on versions of Windows that
            // do not support the new message in the OS.

            if( msg == uMSH_MOUSEWHEEL )
            {
               ((int)wParam < 0) ? nZoom-- : nZoom++;

                //
                // Do other wheel stuff...
                //
                break;
            }

            return DefWindowProc(hwnd,
                                 msg,
                                 wParam,
                                 lParam);
    }

    return 0L;
}

擷取滑鼠滾輪捲軸的數目

下列程式碼可讓應用程式使用 SystemParametersInfo 函式擷取捲軸數目。

#ifndef SPI_GETWHEELSCROLLLINES
#define SPI_GETWHEELSCROLLLINES   104
#endif

#include "zmouse.h"

/*********************************************************
* FUNCTION: GetNumScrollLines
* Purpose : An OS independent method to retrieve the 
*           number of wheel scroll lines
* Params  : none
* Returns : UINT:  Number of scroll lines where WHEEL_PAGESCROLL 
*           indicates to scroll a page at a time.
*********************************************************/
UINT GetNumScrollLines(void)
{
   HWND hdlMsWheel;
   UINT ucNumLines=3;  // 3 is the default
   OSVERSIONINFO osversion;
   UINT uiMsh_MsgScrollLines;
   

   memset(&osversion, 0, sizeof(osversion));
   osversion.dwOSVersionInfoSize =sizeof(osversion);
   GetVersionEx(&osversion);

   if ((osversion.dwPlatformId == VER_PLATFORM_WIN32_WINDOWS) ||
       ( (osversion.dwPlatformId == VER_PLATFORM_WIN32_NT) && 
         (osversion.dwMajorVersion < 4) )   )
   {
        hdlMsWheel = FindWindow(MSH_WHEELMODULE_CLASS, 
                                MSH_WHEELMODULE_TITLE);
        if (hdlMsWheel)
        {
           uiMsh_MsgScrollLines = RegisterWindowMessage
                                     (MSH_SCROLL_LINES);
           if (uiMsh_MsgScrollLines)
                ucNumLines = (int)SendMessage(hdlMsWheel,
                                    uiMsh_MsgScrollLines, 
                                                       0, 
                                                       0);
        }
   }
   else if ( (osversion.dwPlatformId ==
                         VER_PLATFORM_WIN32_NT) &&
             (osversion.dwMajorVersion >= 4) )
   {
      SystemParametersInfo(SPI_GETWHEELSCROLLLINES,
                                          0,
                                    &ucNumLines, 0);
   }
   return(ucNumLines);
}