Microsoft.MobileNetwork packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks 2022-03-01-preview

Article
03/15/2024

Bicep resource definition

The packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource type can be deployed with operations that target:

Resource groups - See resource group deployment commands

For a list of changed properties in each API version, see change log.

Resource format

To create a Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource, add the following Bicep to your template.

resource symbolicname 'Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks@2022-03-01-preview' = {
  name: 'string'
  location: 'string'
  tags: {
    tagName1: 'tagValue1'
    tagName2: 'tagValue2'
  }
  parent: resourceSymbolicName
  properties: {
    naptConfiguration: {
      enabled: 'string'
      pinholeLimits: int
      pinholeTimeouts: {
        icmp: int
        tcp: int
        udp: int
      }
      portRange: {
        maxPort: int
        minPort: int
      }
      portReuseHoldTime: {
        tcp: int
        udp: int
      }
    }
    userEquipmentAddressPoolPrefix: 'string'
    userEquipmentStaticAddressPoolPrefix: 'string'
    userPlaneDataInterface: {
      ipv4Address: 'string'
      ipv4Gateway: 'string'
      ipv4Subnet: 'string'
      name: 'string'
    }
  }
}

Property values

packetCoreControlPlanes/packetCoreDataPlanes/attache...

Name	Description	Value
name	The resource name See how to set names and types for child resources in Bicep.	string (required) Character limit: 1-64 Valid characters: Alphanumeric, hyphens and a period/dot (`.`) Start and end with alphanumeric. Note: A period/dot (`.`) must be followed by an alphanumeric character.
location	The geo-location where the resource lives	string (required)
tags	Resource tags.	Dictionary of tag names and values. See Tags in templates
parent	In Bicep, you can specify the parent resource for a child resource. You only need to add this property when the child resource is declared outside of the parent resource. For more information, see Child resource outside parent resource.	Symbolic name for resource of type: packetCoreDataPlanes
properties	Data network properties.	AttachedDataNetworkPropertiesFormat (required)

AttachedDataNetworkPropertiesFormat

Name	Description	Value
naptConfiguration	The Network Address and Port Translation configuration. If not specified the attached data network uses a default NAPT configuration with NAPT enabled.	NaptConfiguration
userEquipmentAddressPoolPrefix	The user equipment address pool prefixes for the attached data network that are dynamically assigned by the core to UEs when they set up a PDU session. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined then they must be the same size.	string Constraints: Min length = 1 Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$"}`
userEquipmentStaticAddressPoolPrefix	The user equipment address pool prefixes for the attached data network that are statically assigned by the core to UEs when they set up a PDU session. The mapping of static IP to sim is configured in staticIpConfiguration on the sim resource. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined then they must be the same size.	string Constraints: Min length = 1 Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$"}`
userPlaneDataInterface	The user plane interface on the data network. In 5G networks this is called as N6 interface whereas in 4G networks this is called as SGi interface.	InterfaceProperties (required)

NaptConfiguration

Name	Description	Value
enabled	Whether NAPT is enabled for connections to this attachedDataNetwork.	'Disabled' 'Enabled'
pinholeLimits	Maximum number of UDP and TCP pinholes that can be open simultaneously on the core interface.	int Constraints: Min value = 1 Max value = 65536
pinholeTimeouts	Expiry times of inactive NAPT pinholes, in seconds. All timers must be at least 1 second.	PinholeTimeouts
portRange	Range of port numbers to use as translated ports on each translated address. If not specified and NAPT is enabled, this range defaults to 1,024 - 65,535. (Ports under 1,024 should not be used because these are special purpose ports reserved by IANA.)	PortRange
portReuseHoldTime	The minimum time (in seconds) that will pass before a port that was used by a closed pinhole can be recycled for use by another pinhole. All hold times must be minimum 1 second.	PortReuseHoldTimes

PinholeTimeouts

Name	Description	Value
icmp	Pinhole timeout for ICMP pinholes in seconds. Default for ICMP Echo is 60 seconds per RFC 5508 section 3.2.	int Constraints: Min value = 1
tcp	Pinhole timeout for TCP pinholes in seconds. Default for TCP is 2 hours 4 minutes per RFC 5382 section 5.	int Constraints: Min value = 1
udp	Pinhole timeout for UDP pinholes in seconds. Default for UDP is 5 minutes per RFC 4787 section 4.3.	int Constraints: Min value = 1

PortRange

Name	Description	Value
maxPort	The maximum port number	int Constraints: Min value = 1024 Max value = 65535
minPort	The minimum port number	int Constraints: Min value = 1024 Max value = 65535

PortReuseHoldTimes

Name	Description	Value
tcp	Minimum time in seconds that will pass before a TCP port that was used by a closed pinhole can be reused. Default for TCP is 2 minutes.	int Constraints: Min value = 1
udp	Minimum time in seconds that will pass before a UDP port that was used by a closed pinhole can be reused. Default for UDP is 1 minute.	int Constraints: Min value = 1

InterfaceProperties

Name	Description	Value
ipv4Address	The IPv4 address.	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])$`
ipv4Gateway	The default IPv4 gateway (router).	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])$`
ipv4Subnet	The IPv4 subnet.	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$`
name	The logical name for this interface. This should match one of the interfaces configured on your Azure Stack Edge machine.	string (required)

Quickstart templates

The following quickstart templates deploy this resource type.

Template	Description
Create a full 5G Core deployment	This template creates all resources required to deploy a Private 5G Core, including provisioning sims and creating sample QoS policy. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device.
Create a new mobile network site	This template creates a new site with associated 5G packet core resources. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device.

ARM template resource definition

The packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource type can be deployed with operations that target:

Resource groups - See resource group deployment commands

For a list of changed properties in each API version, see change log.

Resource format

To create a Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource, add the following JSON to your template.

{
  "type": "Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks",
  "apiVersion": "2022-03-01-preview",
  "name": "string",
  "location": "string",
  "tags": {
    "tagName1": "tagValue1",
    "tagName2": "tagValue2"
  },
  "properties": {
    "naptConfiguration": {
      "enabled": "string",
      "pinholeLimits": "int",
      "pinholeTimeouts": {
        "icmp": "int",
        "tcp": "int",
        "udp": "int"
      },
      "portRange": {
        "maxPort": "int",
        "minPort": "int"
      },
      "portReuseHoldTime": {
        "tcp": "int",
        "udp": "int"
      }
    },
    "userEquipmentAddressPoolPrefix": "string",
    "userEquipmentStaticAddressPoolPrefix": "string",
    "userPlaneDataInterface": {
      "ipv4Address": "string",
      "ipv4Gateway": "string",
      "ipv4Subnet": "string",
      "name": "string"
    }
  }
}

Property values

packetCoreControlPlanes/packetCoreDataPlanes/attache...

Name	Description	Value
type	The resource type	'Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks'
apiVersion	The resource api version	'2022-03-01-preview'
name	The resource name See how to set names and types for child resources in JSON ARM templates.	string (required) Character limit: 1-64 Valid characters: Alphanumeric, hyphens and a period/dot (`.`) Start and end with alphanumeric. Note: A period/dot (`.`) must be followed by an alphanumeric character.
location	The geo-location where the resource lives	string (required)
tags	Resource tags.	Dictionary of tag names and values. See Tags in templates
properties	Data network properties.	AttachedDataNetworkPropertiesFormat (required)

AttachedDataNetworkPropertiesFormat

Name	Description	Value
naptConfiguration	The Network Address and Port Translation configuration. If not specified the attached data network uses a default NAPT configuration with NAPT enabled.	NaptConfiguration
userEquipmentAddressPoolPrefix	The user equipment address pool prefixes for the attached data network that are dynamically assigned by the core to UEs when they set up a PDU session. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined then they must be the same size.	string Constraints: Min length = 1 Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$"}`
userEquipmentStaticAddressPoolPrefix	The user equipment address pool prefixes for the attached data network that are statically assigned by the core to UEs when they set up a PDU session. The mapping of static IP to sim is configured in staticIpConfiguration on the sim resource. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined then they must be the same size.	string Constraints: Min length = 1 Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$"}`
userPlaneDataInterface	The user plane interface on the data network. In 5G networks this is called as N6 interface whereas in 4G networks this is called as SGi interface.	InterfaceProperties (required)

NaptConfiguration

Name	Description	Value
enabled	Whether NAPT is enabled for connections to this attachedDataNetwork.	'Disabled' 'Enabled'
pinholeLimits	Maximum number of UDP and TCP pinholes that can be open simultaneously on the core interface.	int Constraints: Min value = 1 Max value = 65536
pinholeTimeouts	Expiry times of inactive NAPT pinholes, in seconds. All timers must be at least 1 second.	PinholeTimeouts
portRange	Range of port numbers to use as translated ports on each translated address. If not specified and NAPT is enabled, this range defaults to 1,024 - 65,535. (Ports under 1,024 should not be used because these are special purpose ports reserved by IANA.)	PortRange
portReuseHoldTime	The minimum time (in seconds) that will pass before a port that was used by a closed pinhole can be recycled for use by another pinhole. All hold times must be minimum 1 second.	PortReuseHoldTimes

PinholeTimeouts

Name	Description	Value
icmp	Pinhole timeout for ICMP pinholes in seconds. Default for ICMP Echo is 60 seconds per RFC 5508 section 3.2.	int Constraints: Min value = 1
tcp	Pinhole timeout for TCP pinholes in seconds. Default for TCP is 2 hours 4 minutes per RFC 5382 section 5.	int Constraints: Min value = 1
udp	Pinhole timeout for UDP pinholes in seconds. Default for UDP is 5 minutes per RFC 4787 section 4.3.	int Constraints: Min value = 1

PortRange

Name	Description	Value
maxPort	The maximum port number	int Constraints: Min value = 1024 Max value = 65535
minPort	The minimum port number	int Constraints: Min value = 1024 Max value = 65535

PortReuseHoldTimes

Name	Description	Value
tcp	Minimum time in seconds that will pass before a TCP port that was used by a closed pinhole can be reused. Default for TCP is 2 minutes.	int Constraints: Min value = 1
udp	Minimum time in seconds that will pass before a UDP port that was used by a closed pinhole can be reused. Default for UDP is 1 minute.	int Constraints: Min value = 1

InterfaceProperties

Name	Description	Value
ipv4Address	The IPv4 address.	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])$`
ipv4Gateway	The default IPv4 gateway (router).	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])$`
ipv4Subnet	The IPv4 subnet.	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$`
name	The logical name for this interface. This should match one of the interfaces configured on your Azure Stack Edge machine.	string (required)

Quickstart templates

The following quickstart templates deploy this resource type.

Template	Description
Create a full 5G Core deployment	This template creates all resources required to deploy a Private 5G Core, including provisioning sims and creating sample QoS policy. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device.
Create a new mobile network site	This template creates a new site with associated 5G packet core resources. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device.

Terraform (AzAPI provider) resource definition

The packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource type can be deployed with operations that target:

Resource groups

For a list of changed properties in each API version, see change log.

Resource format

To create a Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks resource, add the following Terraform to your template.

resource "azapi_resource" "symbolicname" {
  type = "Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks@2022-03-01-preview"
  name = "string"
  location = "string"
  parent_id = "string"
  tags = {
    tagName1 = "tagValue1"
    tagName2 = "tagValue2"
  }
  body = jsonencode({
    properties = {
      naptConfiguration = {
        enabled = "string"
        pinholeLimits = int
        pinholeTimeouts = {
          icmp = int
          tcp = int
          udp = int
        }
        portRange = {
          maxPort = int
          minPort = int
        }
        portReuseHoldTime = {
          tcp = int
          udp = int
        }
      }
      userEquipmentAddressPoolPrefix = "string"
      userEquipmentStaticAddressPoolPrefix = "string"
      userPlaneDataInterface = {
        ipv4Address = "string"
        ipv4Gateway = "string"
        ipv4Subnet = "string"
        name = "string"
      }
    }
  })
}

Property values

packetCoreControlPlanes/packetCoreDataPlanes/attache...

Name	Description	Value
type	The resource type	"Microsoft.MobileNetwork/packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks@2022-03-01-preview"
name	The resource name	string (required) Character limit: 1-64 Valid characters: Alphanumeric, hyphens and a period/dot (`.`) Start and end with alphanumeric. Note: A period/dot (`.`) must be followed by an alphanumeric character.
location	The geo-location where the resource lives	string (required)
parent_id	The ID of the resource that is the parent for this resource.	ID for resource of type: packetCoreDataPlanes
tags	Resource tags.	Dictionary of tag names and values.
properties	Data network properties.	AttachedDataNetworkPropertiesFormat (required)

AttachedDataNetworkPropertiesFormat

Name	Description	Value
naptConfiguration	The Network Address and Port Translation configuration. If not specified the attached data network uses a default NAPT configuration with NAPT enabled.	NaptConfiguration
userEquipmentAddressPoolPrefix	The user equipment address pool prefixes for the attached data network that are dynamically assigned by the core to UEs when they set up a PDU session. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined then they must be the same size.	string Constraints: Min length = 1 Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$"}`
userEquipmentStaticAddressPoolPrefix	The user equipment address pool prefixes for the attached data network that are statically assigned by the core to UEs when they set up a PDU session. The mapping of static IP to sim is configured in staticIpConfiguration on the sim resource. At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined then they must be the same size.	string Constraints: Min length = 1 Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$"}`
userPlaneDataInterface	The user plane interface on the data network. In 5G networks this is called as N6 interface whereas in 4G networks this is called as SGi interface.	InterfaceProperties (required)

NaptConfiguration

Name	Description	Value
enabled	Whether NAPT is enabled for connections to this attachedDataNetwork.	"Disabled" "Enabled"
pinholeLimits	Maximum number of UDP and TCP pinholes that can be open simultaneously on the core interface.	int Constraints: Min value = 1 Max value = 65536
pinholeTimeouts	Expiry times of inactive NAPT pinholes, in seconds. All timers must be at least 1 second.	PinholeTimeouts
portRange	Range of port numbers to use as translated ports on each translated address. If not specified and NAPT is enabled, this range defaults to 1,024 - 65,535. (Ports under 1,024 should not be used because these are special purpose ports reserved by IANA.)	PortRange
portReuseHoldTime	The minimum time (in seconds) that will pass before a port that was used by a closed pinhole can be recycled for use by another pinhole. All hold times must be minimum 1 second.	PortReuseHoldTimes

PinholeTimeouts

Name	Description	Value
icmp	Pinhole timeout for ICMP pinholes in seconds. Default for ICMP Echo is 60 seconds per RFC 5508 section 3.2.	int Constraints: Min value = 1
tcp	Pinhole timeout for TCP pinholes in seconds. Default for TCP is 2 hours 4 minutes per RFC 5382 section 5.	int Constraints: Min value = 1
udp	Pinhole timeout for UDP pinholes in seconds. Default for UDP is 5 minutes per RFC 4787 section 4.3.	int Constraints: Min value = 1

PortRange

Name	Description	Value
maxPort	The maximum port number	int Constraints: Min value = 1024 Max value = 65535
minPort	The minimum port number	int Constraints: Min value = 1024 Max value = 65535

PortReuseHoldTimes

Name	Description	Value
tcp	Minimum time in seconds that will pass before a TCP port that was used by a closed pinhole can be reused. Default for TCP is 2 minutes.	int Constraints: Min value = 1
udp	Minimum time in seconds that will pass before a UDP port that was used by a closed pinhole can be reused. Default for UDP is 1 minute.	int Constraints: Min value = 1

InterfaceProperties

Name	Description	Value
ipv4Address	The IPv4 address.	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])$`
ipv4Gateway	The default IPv4 gateway (router).	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])$`
ipv4Subnet	The IPv4 subnet.	string Constraints: Pattern = `^(([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])\.){3}([0-9]\|[1-9][0-9]\|1[0-9][0-9]\|2[0-4][0-9]\|25[0-5])(\/([0-9]\|[1-2][0-9]\|3[0-2]))$`
name	The logical name for this interface. This should match one of the interfaces configured on your Azure Stack Edge machine.	string (required)

Share via

Microsoft.MobileNetwork packetCoreControlPlanes/packetCoreDataPlanes/attachedDataNetworks 2022-03-01-preview

Bicep resource definition

Resource format

Property values

packetCoreControlPlanes/packetCoreDataPlanes/attache...

AttachedDataNetworkPropertiesFormat

NaptConfiguration

PinholeTimeouts

PortRange

PortReuseHoldTimes

InterfaceProperties

Quickstart templates

ARM template resource definition

Resource format

Property values

packetCoreControlPlanes/packetCoreDataPlanes/attache...

AttachedDataNetworkPropertiesFormat

NaptConfiguration

PinholeTimeouts

PortRange

PortReuseHoldTimes

InterfaceProperties

Quickstart templates

Terraform (AzAPI provider) resource definition

Resource format

Property values

packetCoreControlPlanes/packetCoreDataPlanes/attache...

AttachedDataNetworkPropertiesFormat

NaptConfiguration

PinholeTimeouts

PortRange

PortReuseHoldTimes

InterfaceProperties

Feedback

Additional resources