Microsoft.MobileNetwork mobileNetworks/simPolicies 2022-04-01-preview
Bicep resource definition
The mobileNetworks/simPolicies resource type can be deployed with operations that target:
- Resource groups - See resource group deployment commands
For a list of changed properties in each API version, see change log.
Resource format
To create a Microsoft.MobileNetwork/mobileNetworks/simPolicies resource, add the following Bicep to your template.
resource symbolicname 'Microsoft.MobileNetwork/mobileNetworks/simPolicies@2022-04-01-preview' = {
name: 'string'
location: 'string'
tags: {
tagName1: 'tagValue1'
tagName2: 'tagValue2'
}
parent: resourceSymbolicName
properties: {
defaultSlice: {
id: 'string'
}
registrationTimer: int
rfspIndex: int
sliceConfigurations: [
{
dataNetworkConfigurations: [
{
5qi: int
additionalAllowedSessionTypes: [
'string'
]
allocationAndRetentionPriorityLevel: int
allowedServices: [
{
id: 'string'
}
]
dataNetwork: {
id: 'string'
}
defaultSessionType: 'string'
preemptionCapability: 'string'
preemptionVulnerability: 'string'
sessionAmbr: {
downlink: 'string'
uplink: 'string'
}
}
]
defaultDataNetwork: {
id: 'string'
}
slice: {
id: 'string'
}
}
]
ueAmbr: {
downlink: 'string'
uplink: 'string'
}
}
}
Property values
mobileNetworks/simPolicies
Name | Description | Value |
---|---|---|
name | The resource name See how to set names and types for child resources in Bicep. |
string (required) Character limit: 1-64 Valid characters: Alphanumerics and hyphens. Start with alphanumeric. |
location | The geo-location where the resource lives | string (required) |
tags | Resource tags. | Dictionary of tag names and values. See Tags in templates |
parent | In Bicep, you can specify the parent resource for a child resource. You only need to add this property when the child resource is declared outside of the parent resource. For more information, see Child resource outside parent resource. |
Symbolic name for resource of type: mobileNetworks |
properties | SIM policy Properties. | SimPolicyPropertiesFormat (required) |
SimPolicyPropertiesFormat
Name | Description | Value |
---|---|---|
defaultSlice | The default slice to use if the UE does not explicitly specify it. This slice must exist in the sliceConfigurations map. |
SliceResourceId (required) |
registrationTimer | Interval for the UE periodic registration update procedure, in seconds. | int Constraints: Min value = 30 |
rfspIndex | RAT/Frequency Selection Priority Index, defined in 3GPP TS 36.413. This is an optional setting and by default is unspecified. | int Constraints: Min value = 1 Max value = 256 |
sliceConfigurations | The allowed slices and the settings to use for them. The list must not contain duplicate items and must contain at least one item. | SliceConfiguration[] (required) Constraints: Min length = 1 |
ueAmbr | Aggregate maximum bit rate across all non-GBR QoS flows of all PDU sessions of a given UE. See 3GPP TS23.501 section 5.7.2.6 for a full description of the UE-AMBR. | Ambr (required) |
SliceResourceId
Name | Description | Value |
---|---|---|
id | Slice resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[sS][lL][iI][cC][eE][sS]/[^/?#]+$ |
SliceConfiguration
Name | Description | Value |
---|---|---|
dataNetworkConfigurations | The allowed data networks and the settings to use for them. The list must not contain duplicate items and must contain at least one item. | DataNetworkConfiguration[] (required) Constraints: Min length = 1 |
defaultDataNetwork | The default data network to use if the UE does not explicitly specify it. Configuration for this object must exist in the dataNetworkConfigurations map. |
DataNetworkResourceId (required) |
slice | A reference to the slice that these settings apply to | SliceResourceId (required) |
DataNetworkConfiguration
Name | Description | Value |
---|---|---|
5qi | Default QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values. | int Constraints: Min value = 1 Max value = 127 |
additionalAllowedSessionTypes | Allowed session types in addition to the default session type. Must not duplicate the default session type. | String array containing any of: 'IPv4' 'IPv6' Constraints: Max length = 1 |
allocationAndRetentionPriorityLevel | Default QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. |
int Constraints: Min value = 1 Max value = 15 |
allowedServices | List of services that can be used as part of this SIM policy. The list must not contain duplicate items and must contain at least one item. | ServiceResourceId[] (required) Constraints: Min length = 1 |
dataNetwork | A reference to the data network that these settings apply to | DataNetworkResourceId (required) |
defaultSessionType | The default PDU session type, which is used if the UE does not request a specific session type. | 'IPv4' 'IPv6' |
preemptionCapability | Default QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. | 'MayPreempt' 'NotPreempt' |
preemptionVulnerability | Default QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. | 'NotPreemptable' 'Preemptable' |
sessionAmbr | Aggregate maximum bit rate across all non-GBR QoS flows of a given PDU session. See 3GPP TS23.501 section 5.7.2.6 for a full description of the Session-AMBR. | Ambr (required) |
ServiceResourceId
Name | Description | Value |
---|---|---|
id | Service resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[sS][eE][rR][vV][iI][cC][eE][sS]/[^/?#]+$ |
DataNetworkResourceId
Name | Description | Value |
---|---|---|
id | Data network resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[dD][aA][tT][aA][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+$ |
Ambr
Name | Description | Value |
---|---|---|
downlink | Downlink bit rate. | string (required) Constraints: Pattern = ^\d+(\.\d+)? (bps|Kbps|Mbps|Gbps|Tbps)$ |
uplink | Uplink bit rate. | string (required) Constraints: Pattern = ^\d+(\.\d+)? (bps|Kbps|Mbps|Gbps|Tbps)$ |
Quickstart templates
The following quickstart templates deploy this resource type.
Template | Description |
---|---|
Create a full 5G Core deployment |
This template creates all resources required to deploy a Private 5G Core, including provisioning sims and creating sample QoS policy. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device. |
Create a sim policy |
This template creates a service and sim policy for an existing mobile network. |
ARM template resource definition
The mobileNetworks/simPolicies resource type can be deployed with operations that target:
- Resource groups - See resource group deployment commands
For a list of changed properties in each API version, see change log.
Resource format
To create a Microsoft.MobileNetwork/mobileNetworks/simPolicies resource, add the following JSON to your template.
{
"type": "Microsoft.MobileNetwork/mobileNetworks/simPolicies",
"apiVersion": "2022-04-01-preview",
"name": "string",
"location": "string",
"tags": {
"tagName1": "tagValue1",
"tagName2": "tagValue2"
},
"properties": {
"defaultSlice": {
"id": "string"
},
"registrationTimer": "int",
"rfspIndex": "int",
"sliceConfigurations": [
{
"dataNetworkConfigurations": [
{
"5qi": "int",
"additionalAllowedSessionTypes": [ "string" ],
"allocationAndRetentionPriorityLevel": "int",
"allowedServices": [
{
"id": "string"
}
],
"dataNetwork": {
"id": "string"
},
"defaultSessionType": "string",
"preemptionCapability": "string",
"preemptionVulnerability": "string",
"sessionAmbr": {
"downlink": "string",
"uplink": "string"
}
}
],
"defaultDataNetwork": {
"id": "string"
},
"slice": {
"id": "string"
}
}
],
"ueAmbr": {
"downlink": "string",
"uplink": "string"
}
}
}
Property values
mobileNetworks/simPolicies
Name | Description | Value |
---|---|---|
type | The resource type | 'Microsoft.MobileNetwork/mobileNetworks/simPolicies' |
apiVersion | The resource api version | '2022-04-01-preview' |
name | The resource name See how to set names and types for child resources in JSON ARM templates. |
string (required) Character limit: 1-64 Valid characters: Alphanumerics and hyphens. Start with alphanumeric. |
location | The geo-location where the resource lives | string (required) |
tags | Resource tags. | Dictionary of tag names and values. See Tags in templates |
properties | SIM policy Properties. | SimPolicyPropertiesFormat (required) |
SimPolicyPropertiesFormat
Name | Description | Value |
---|---|---|
defaultSlice | The default slice to use if the UE does not explicitly specify it. This slice must exist in the sliceConfigurations map. |
SliceResourceId (required) |
registrationTimer | Interval for the UE periodic registration update procedure, in seconds. | int Constraints: Min value = 30 |
rfspIndex | RAT/Frequency Selection Priority Index, defined in 3GPP TS 36.413. This is an optional setting and by default is unspecified. | int Constraints: Min value = 1 Max value = 256 |
sliceConfigurations | The allowed slices and the settings to use for them. The list must not contain duplicate items and must contain at least one item. | SliceConfiguration[] (required) Constraints: Min length = 1 |
ueAmbr | Aggregate maximum bit rate across all non-GBR QoS flows of all PDU sessions of a given UE. See 3GPP TS23.501 section 5.7.2.6 for a full description of the UE-AMBR. | Ambr (required) |
SliceResourceId
Name | Description | Value |
---|---|---|
id | Slice resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[sS][lL][iI][cC][eE][sS]/[^/?#]+$ |
SliceConfiguration
Name | Description | Value |
---|---|---|
dataNetworkConfigurations | The allowed data networks and the settings to use for them. The list must not contain duplicate items and must contain at least one item. | DataNetworkConfiguration[] (required) Constraints: Min length = 1 |
defaultDataNetwork | The default data network to use if the UE does not explicitly specify it. Configuration for this object must exist in the dataNetworkConfigurations map. |
DataNetworkResourceId (required) |
slice | A reference to the slice that these settings apply to | SliceResourceId (required) |
DataNetworkConfiguration
Name | Description | Value |
---|---|---|
5qi | Default QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values. | int Constraints: Min value = 1 Max value = 127 |
additionalAllowedSessionTypes | Allowed session types in addition to the default session type. Must not duplicate the default session type. | String array containing any of: 'IPv4' 'IPv6' Constraints: Max length = 1 |
allocationAndRetentionPriorityLevel | Default QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. |
int Constraints: Min value = 1 Max value = 15 |
allowedServices | List of services that can be used as part of this SIM policy. The list must not contain duplicate items and must contain at least one item. | ServiceResourceId[] (required) Constraints: Min length = 1 |
dataNetwork | A reference to the data network that these settings apply to | DataNetworkResourceId (required) |
defaultSessionType | The default PDU session type, which is used if the UE does not request a specific session type. | 'IPv4' 'IPv6' |
preemptionCapability | Default QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. | 'MayPreempt' 'NotPreempt' |
preemptionVulnerability | Default QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. | 'NotPreemptable' 'Preemptable' |
sessionAmbr | Aggregate maximum bit rate across all non-GBR QoS flows of a given PDU session. See 3GPP TS23.501 section 5.7.2.6 for a full description of the Session-AMBR. | Ambr (required) |
ServiceResourceId
Name | Description | Value |
---|---|---|
id | Service resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[sS][eE][rR][vV][iI][cC][eE][sS]/[^/?#]+$ |
DataNetworkResourceId
Name | Description | Value |
---|---|---|
id | Data network resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[dD][aA][tT][aA][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+$ |
Ambr
Name | Description | Value |
---|---|---|
downlink | Downlink bit rate. | string (required) Constraints: Pattern = ^\d+(\.\d+)? (bps|Kbps|Mbps|Gbps|Tbps)$ |
uplink | Uplink bit rate. | string (required) Constraints: Pattern = ^\d+(\.\d+)? (bps|Kbps|Mbps|Gbps|Tbps)$ |
Quickstart templates
The following quickstart templates deploy this resource type.
Template | Description |
---|---|
Create a full 5G Core deployment |
This template creates all resources required to deploy a Private 5G Core, including provisioning sims and creating sample QoS policy. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device. |
Create a sim policy |
This template creates a service and sim policy for an existing mobile network. |
Terraform (AzAPI provider) resource definition
The mobileNetworks/simPolicies resource type can be deployed with operations that target:
- Resource groups
For a list of changed properties in each API version, see change log.
Resource format
To create a Microsoft.MobileNetwork/mobileNetworks/simPolicies resource, add the following Terraform to your template.
resource "azapi_resource" "symbolicname" {
type = "Microsoft.MobileNetwork/mobileNetworks/simPolicies@2022-04-01-preview"
name = "string"
location = "string"
parent_id = "string"
tags = {
tagName1 = "tagValue1"
tagName2 = "tagValue2"
}
body = jsonencode({
properties = {
defaultSlice = {
id = "string"
}
registrationTimer = int
rfspIndex = int
sliceConfigurations = [
{
dataNetworkConfigurations = [
{
5qi = int
additionalAllowedSessionTypes = [
"string"
]
allocationAndRetentionPriorityLevel = int
allowedServices = [
{
id = "string"
}
]
dataNetwork = {
id = "string"
}
defaultSessionType = "string"
preemptionCapability = "string"
preemptionVulnerability = "string"
sessionAmbr = {
downlink = "string"
uplink = "string"
}
}
]
defaultDataNetwork = {
id = "string"
}
slice = {
id = "string"
}
}
]
ueAmbr = {
downlink = "string"
uplink = "string"
}
}
})
}
Property values
mobileNetworks/simPolicies
Name | Description | Value |
---|---|---|
type | The resource type | "Microsoft.MobileNetwork/mobileNetworks/simPolicies@2022-04-01-preview" |
name | The resource name | string (required) Character limit: 1-64 Valid characters: Alphanumerics and hyphens. Start with alphanumeric. |
location | The geo-location where the resource lives | string (required) |
parent_id | The ID of the resource that is the parent for this resource. | ID for resource of type: mobileNetworks |
tags | Resource tags. | Dictionary of tag names and values. |
properties | SIM policy Properties. | SimPolicyPropertiesFormat (required) |
SimPolicyPropertiesFormat
Name | Description | Value |
---|---|---|
defaultSlice | The default slice to use if the UE does not explicitly specify it. This slice must exist in the sliceConfigurations map. |
SliceResourceId (required) |
registrationTimer | Interval for the UE periodic registration update procedure, in seconds. | int Constraints: Min value = 30 |
rfspIndex | RAT/Frequency Selection Priority Index, defined in 3GPP TS 36.413. This is an optional setting and by default is unspecified. | int Constraints: Min value = 1 Max value = 256 |
sliceConfigurations | The allowed slices and the settings to use for them. The list must not contain duplicate items and must contain at least one item. | SliceConfiguration[] (required) Constraints: Min length = 1 |
ueAmbr | Aggregate maximum bit rate across all non-GBR QoS flows of all PDU sessions of a given UE. See 3GPP TS23.501 section 5.7.2.6 for a full description of the UE-AMBR. | Ambr (required) |
SliceResourceId
Name | Description | Value |
---|---|---|
id | Slice resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[sS][lL][iI][cC][eE][sS]/[^/?#]+$ |
SliceConfiguration
Name | Description | Value |
---|---|---|
dataNetworkConfigurations | The allowed data networks and the settings to use for them. The list must not contain duplicate items and must contain at least one item. | DataNetworkConfiguration[] (required) Constraints: Min length = 1 |
defaultDataNetwork | The default data network to use if the UE does not explicitly specify it. Configuration for this object must exist in the dataNetworkConfigurations map. |
DataNetworkResourceId (required) |
slice | A reference to the slice that these settings apply to | SliceResourceId (required) |
DataNetworkConfiguration
Name | Description | Value |
---|---|---|
5qi | Default QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values. | int Constraints: Min value = 1 Max value = 127 |
additionalAllowedSessionTypes | Allowed session types in addition to the default session type. Must not duplicate the default session type. | String array containing any of: "IPv4" "IPv6" Constraints: Max length = 1 |
allocationAndRetentionPriorityLevel | Default QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. |
int Constraints: Min value = 1 Max value = 15 |
allowedServices | List of services that can be used as part of this SIM policy. The list must not contain duplicate items and must contain at least one item. | ServiceResourceId[] (required) Constraints: Min length = 1 |
dataNetwork | A reference to the data network that these settings apply to | DataNetworkResourceId (required) |
defaultSessionType | The default PDU session type, which is used if the UE does not request a specific session type. | "IPv4" "IPv6" |
preemptionCapability | Default QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. | "MayPreempt" "NotPreempt" |
preemptionVulnerability | Default QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters. | "NotPreemptable" "Preemptable" |
sessionAmbr | Aggregate maximum bit rate across all non-GBR QoS flows of a given PDU session. See 3GPP TS23.501 section 5.7.2.6 for a full description of the Session-AMBR. | Ambr (required) |
ServiceResourceId
Name | Description | Value |
---|---|---|
id | Service resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[sS][eE][rR][vV][iI][cC][eE][sS]/[^/?#]+$ |
DataNetworkResourceId
Name | Description | Value |
---|---|---|
id | Data network resource ID. | string (required) Constraints: Pattern = ^/[sS][uU][bB][sS][cC][rR][iI][pP][tT][iI][oO][nN][sS]/[^/?#]+/[rR][eE][sS][oO][uU][rR][cC][eE][gG][rR][oO][uU][pP][sS]/[^/?#]+/[pP][rR][oO][vV][iI][dD][eE][rR][sS]/[mM][iI][cC][rR][oO][sS][oO][fF][tT]\.[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK]/[mM][oO][bB][iI][lL][eE][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+/[dD][aA][tT][aA][nN][eE][tT][wW][oO][rR][kK][sS]/[^/?#]+$ |
Ambr
Name | Description | Value |
---|---|---|
downlink | Downlink bit rate. | string (required) Constraints: Pattern = ^\d+(\.\d+)? (bps|Kbps|Mbps|Gbps|Tbps)$ |
uplink | Uplink bit rate. | string (required) Constraints: Pattern = ^\d+(\.\d+)? (bps|Kbps|Mbps|Gbps|Tbps)$ |