Share via

Windows CE Boot Loader Output for the Hitachi US7750 HARP (Aspen) SDB

  • Article

The following output shows the Windows CE boot loader output for the Hitachi US7750 HARP (Aspen) SDB.

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Dec 14
 2002 00:21:41
Copyright (c) 2000-2001  Microsoft Corporation
Microsoft Windows CE Ethernet Bootloader 3.4 for CE/Aspen (Dec 20 2002)
Stack=8C020F80h & DipSwith =0xF
Microsoft Windows CE Ethernet Bootloader 3.4
Copyright(c) 1998,1999 SIC/Hitachi,Ltd.
SMC base : 0xA4400300
+SMCInit
SMC Ethernet card detected at I/O base 0xA4400300
SMC Ethernet Address: 00:30:55:01:01:95
SMC config reg val: 0000B2B1
SMC Reset complete2
-SMCInit
Calling ReadEEPROMData...
Read IP config from EEPROM: IP Address: 10.199.13.16,  netmask: 255.255.252.0
ManufactureCode=INTEL
Device Code=28F640J5
Platform initailization completed!
System ready!
Preparing for download...
Read Ethernet board DIP switches: 0x0000000F
Platform Name:ASPEN405
Hit ENTER within 3 seconds to enter static IP address!InitDHCP():: Calling Proce
ssDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 10.199.14.138
Got Response from DHCP server, IP address: 10.199.14.138

ProcessDHCP()::DHCP IP Address Resolved as 10.199.14.138, netmask: 255.255.252.0
Lease time: 259200 seconds
Got Response from DHCP server, IP address: 10.199.14.138
No ARP response in 2 seconds, assuming ownership of 10.199.14.138
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255

See Also

How to Use the BSP for the Hitachi US7750 HARP (Aspen) SDB

Last updated on Wednesday, April 13, 2005

© 2005 Microsoft Corporation. All rights reserved.