Image.Save Method

Source:

Image.cs

Source:

Image.cs

public:
 void Save(System::String ^ filename, System::Drawing::Imaging::ImageCodecInfo ^ encoder, System::Drawing::Imaging::EncoderParameters ^ encoderParams);

public void Save (string filename, System.Drawing.Imaging.ImageCodecInfo encoder, System.Drawing.Imaging.EncoderParameters? encoderParams);

public void Save (string filename, System.Drawing.Imaging.ImageCodecInfo encoder, System.Drawing.Imaging.EncoderParameters encoderParams);

member this.Save : string * System.Drawing.Imaging.ImageCodecInfo * System.Drawing.Imaging.EncoderParameters -> unit

Public Sub Save (filename As String, encoder As ImageCodecInfo, encoderParams As EncoderParameters)

Parameters

Exceptions

Examples

The following example creates a Bitmap object from a BMP file. The code saves the bitmap to three JPEG files, each with a different quality level.

#using <System.Drawing.dll>

using namespace System;
using namespace System::Drawing;
using namespace System::Drawing::Imaging;
static ImageCodecInfo^ GetEncoderInfo( ImageFormat^ format );
int main()
{
   Bitmap^ myBitmap;
   ImageCodecInfo^ myImageCodecInfo;
   Encoder^ myEncoder;
   EncoderParameter^ myEncoderParameter;
   EncoderParameters^ myEncoderParameters;
   
   // Create a Bitmap object based on a BMP file.
   myBitmap = gcnew Bitmap( "Shapes.bmp" );
   
   // Get an ImageCodecInfo object that represents the JPEG codec.
   myImageCodecInfo = GetEncoderInfo( ImageFormat->Jpeg );
   
   // Create an Encoder object based on the GUID
   // for the Quality parameter category.
   myEncoder = Encoder::Quality;
   
   // Create an EncoderParameters object.
   // An EncoderParameters object has an array of EncoderParameter
   // objects. In this case, there is only one
   // EncoderParameter object in the array.
   myEncoderParameters = gcnew EncoderParameters( 1 );
   
   // Save the bitmap as a JPEG file with quality level 25.
   myEncoderParameter = gcnew EncoderParameter( myEncoder,__int64(25) );
   myEncoderParameters->Param[ 0 ] = myEncoderParameter;
   myBitmap->Save( "Shapes025.jpg", myImageCodecInfo, myEncoderParameters );
   
   // Save the bitmap as a JPEG file with quality level 50.
   myEncoderParameter = gcnew EncoderParameter( myEncoder,__int64(50) );
   myEncoderParameters->Param[ 0 ] = myEncoderParameter;
   myBitmap->Save( "Shapes050.jpg", myImageCodecInfo, myEncoderParameters );
   
   // Save the bitmap as a JPEG file with quality level 75.
   myEncoderParameter = gcnew EncoderParameter( myEncoder,__int64(75) );
   myEncoderParameters->Param[ 0 ] = myEncoderParameter;
   myBitmap->Save( "Shapes075.jpg", myImageCodecInfo, myEncoderParameters );
}

static ImageCodecInfo^ GetEncoderInfo( ImageFormat^ format )
{
   int j;
   array<ImageCodecInfo^>^encoders;
   encoders = ImageCodecInfo::GetImageEncoders();
   for ( j = 0; j < encoders->Length; ++j )
   {
      if ( encoders[ j ]->FormatID == format->Guid)
            return encoders[ j ];

   }
   return nullptr;
}

using System;
using System.Drawing;
using System.Drawing.Imaging;
class Example_SetJPEGQuality
{
    public static void Main()
    {
        Bitmap myBitmap;
        ImageCodecInfo myImageCodecInfo;
        Encoder myEncoder;
        EncoderParameter myEncoderParameter;
        EncoderParameters myEncoderParameters;
                     
        // Create a Bitmap object based on a BMP file.
        myBitmap = new Bitmap("Shapes.bmp");
                     
        // Get an ImageCodecInfo object that represents the JPEG codec.
        myImageCodecInfo = GetEncoderInfo("image/jpeg");
                     
        // Create an Encoder object based on the GUID
                     
        // for the Quality parameter category.
        myEncoder = Encoder.Quality;
                     
        // Create an EncoderParameters object.
                     
        // An EncoderParameters object has an array of EncoderParameter
                     
        // objects. In this case, there is only one
                     
        // EncoderParameter object in the array.
        myEncoderParameters = new EncoderParameters(1);
                     
        // Save the bitmap as a JPEG file with quality level 25.
        myEncoderParameter = new EncoderParameter(myEncoder, 25L);
        myEncoderParameters.Param[0] = myEncoderParameter;
        myBitmap.Save("Shapes025.jpg", myImageCodecInfo, myEncoderParameters);
                     
        // Save the bitmap as a JPEG file with quality level 50.
        myEncoderParameter = new EncoderParameter(myEncoder, 50L);
        myEncoderParameters.Param[0] = myEncoderParameter;
        myBitmap.Save("Shapes050.jpg", myImageCodecInfo, myEncoderParameters);
                     
        // Save the bitmap as a JPEG file with quality level 75.
        myEncoderParameter = new EncoderParameter(myEncoder, 75L);
        myEncoderParameters.Param[0] = myEncoderParameter;
        myBitmap.Save("Shapes075.jpg", myImageCodecInfo, myEncoderParameters);
    }
    private static ImageCodecInfo GetEncoderInfo(String mimeType)
    {
        int j;
        ImageCodecInfo[] encoders;
        encoders = ImageCodecInfo.GetImageEncoders();
        for(j = 0; j < encoders.Length; ++j)
        {
            if(encoders[j].MimeType == mimeType)
                return encoders[j];
        }
        return null;
    }
}

Imports System.Drawing
Imports System.Drawing.Imaging


Class Example_SetJPEGQuality

    Public Shared Sub Main()
        Dim myBitmap As Bitmap
        Dim myImageCodecInfo As ImageCodecInfo
        Dim myEncoder As Encoder
        Dim myEncoderParameter As EncoderParameter
        Dim myEncoderParameters As EncoderParameters

        ' Create a Bitmap object based on a BMP file.
        myBitmap = New Bitmap("Shapes.bmp")

        ' Get an ImageCodecInfo object that represents the JPEG codec.
        myImageCodecInfo = GetEncoderInfo(ImageFormat.Jpeg)

        ' Create an Encoder object based on the GUID
        ' for the Quality parameter category.
        myEncoder = Encoder.Quality

        ' Create an EncoderParameters object.
        ' An EncoderParameters object has an array of EncoderParameter
        ' objects. In this case, there is only one
        ' EncoderParameter object in the array.
        myEncoderParameters = New EncoderParameters(1)

        ' Save the bitmap as a JPEG file with quality level 25.
        myEncoderParameter = New EncoderParameter(myEncoder, CType(25L, Int32))
        myEncoderParameters.Param(0) = myEncoderParameter
        myBitmap.Save("Shapes025.jpg", myImageCodecInfo, myEncoderParameters)

        ' Save the bitmap as a JPEG file with quality level 50.
        myEncoderParameter = New EncoderParameter(myEncoder, CType(50L, Int32))
        myEncoderParameters.Param(0) = myEncoderParameter
        myBitmap.Save("Shapes050.jpg", myImageCodecInfo, myEncoderParameters)

        ' Save the bitmap as a JPEG file with quality level 75.
        myEncoderParameter = New EncoderParameter(myEncoder, CType(75L, Int32))
        myEncoderParameters.Param(0) = myEncoderParameter
        myBitmap.Save("Shapes075.jpg", myImageCodecInfo, myEncoderParameters)

    End Sub

    Private Shared Function GetEncoderInfo(ByVal format As ImageFormat) As ImageCodecInfo
        Dim j As Integer
        Dim encoders() As ImageCodecInfo
        encoders = ImageCodecInfo.GetImageEncoders()

        j = 0
        While j < encoders.Length
            If encoders(j).FormatID = format.Guid Then
                Return encoders(j)
            End If
            j += 1
        End While
        Return Nothing

    End Function 'GetEncoderInfo
End Class

Remarks

Saving the image to the same file it was constructed from is not allowed and throws an exception.

See also

• How to: Set JPEG Compression Level

Source:

Image.cs

Source:

Image.cs

public:
 void Save(System::IO::Stream ^ stream, System::Drawing::Imaging::ImageCodecInfo ^ encoder, System::Drawing::Imaging::EncoderParameters ^ encoderParams);

public void Save (System.IO.Stream stream, System.Drawing.Imaging.ImageCodecInfo encoder, System.Drawing.Imaging.EncoderParameters? encoderParams);

public void Save (System.IO.Stream stream, System.Drawing.Imaging.ImageCodecInfo encoder, System.Drawing.Imaging.EncoderParameters encoderParams);

member this.Save : System.IO.Stream * System.Drawing.Imaging.ImageCodecInfo * System.Drawing.Imaging.EncoderParameters -> unit

Public Sub Save (stream As Stream, encoder As ImageCodecInfo, encoderParams As EncoderParameters)

Parameters

Exceptions

Remarks

Do not save an image to the same stream that was used to construct the image. Doing so might damage the stream.

The image must be saved to the stream at an offset of zero. If any additional data has been written to the stream before saving the image, the image data in the stream will be corrupted.

Source:

Image.cs

Source:

Image.cs

public:
 void Save(System::String ^ filename, System::Drawing::Imaging::ImageFormat ^ format);

public void Save (string filename, System.Drawing.Imaging.ImageFormat format);

member this.Save : string * System.Drawing.Imaging.ImageFormat -> unit

Public Sub Save (filename As String, format As ImageFormat)

Parameters

Exceptions

Examples

The following code example demonstrates how to construct a bitmap from a type, and how to use the Save method. To run this example, paste the code into a Windows Form. Handle the form's Paint event, and call the ConstructFromResourceSaveAsGif method, passing e as PaintEventArgs

private:
    void ConstructFromResourceSaveAsGif(PaintEventArgs^ e)
    {
        // Construct a bitmap from the button image resource.
        Bitmap^ bmp1 = gcnew Bitmap(Button::typeid, "Button.bmp");
        String^ savePath =  
            Environment::GetEnvironmentVariable("TEMP") + "\\Button.bmp";

        try
        {
            // Save the image as a GIF.
            bmp1->Save(savePath, System::Drawing::Imaging::ImageFormat::Gif);
        }
        catch (IOException^)
        {
            // Carry on regardless
        }

        // Construct a new image from the GIF file.
        Bitmap^ bmp2 = nullptr;
        if (File::Exists(savePath))
        {
            bmp2 = gcnew Bitmap(savePath);
        }

        // Draw the two images.
        e->Graphics->DrawImage(bmp1, Point(10, 10));

        // If bmp1 did not save to disk, bmp2 may be null
        if (bmp2 != nullptr)
        {
            e->Graphics->DrawImage(bmp2, Point(10, 40));
        }

        // Dispose of the image files.
        delete bmp1;
        if (bmp2 != nullptr)
        {
            delete bmp2;
        }
    }

private void ConstructFromResourceSaveAsGif(PaintEventArgs e)
{

    // Construct a bitmap from the button image resource.
    Bitmap bmp1 = new Bitmap(typeof(Button), "Button.bmp");

    // Save the image as a GIF.
    bmp1.Save("c:\\button.gif", System.Drawing.Imaging.ImageFormat.Gif);

    // Construct a new image from the GIF file.
    Bitmap bmp2 = new Bitmap("c:\\button.gif");

    // Draw the two images.
    e.Graphics.DrawImage(bmp1, new Point(10, 10));
    e.Graphics.DrawImage(bmp2, new Point(10, 40));

    // Dispose of the image files.
    bmp1.Dispose();
    bmp2.Dispose();
}

Private Sub ConstructFromResourceSaveAsGif(ByVal e As PaintEventArgs)

    ' Construct a bitmap from the button image resource.
    Dim bmp1 As New Bitmap(GetType(Button), "Button.bmp")

    ' Save the image as a GIF.
    bmp1.Save("c:\button.gif", System.Drawing.Imaging.ImageFormat.Gif)

    ' Construct a new image from the GIF file.
    Dim bmp2 As New Bitmap("c:\button.gif")

    ' Draw the two images.
    e.Graphics.DrawImage(bmp1, New Point(10, 10))
    e.Graphics.DrawImage(bmp2, New Point(10, 40))

    ' Dispose of the image files.
    bmp1.Dispose()
    bmp2.Dispose()
End Sub

Source:

Image.cs

Source:

Image.cs

public:
 void Save(System::IO::Stream ^ stream, System::Drawing::Imaging::ImageFormat ^ format);

public void Save (System.IO.Stream stream, System.Drawing.Imaging.ImageFormat format);

member this.Save : System.IO.Stream * System.Drawing.Imaging.ImageFormat -> unit

Public Sub Save (stream As Stream, format As ImageFormat)

Parameters

Exceptions

Remarks

You should avoid saving an image to the same stream that was used to construct it. Doing so might damage the stream.

The image must be saved to the stream at an offset of zero. If any additional data has been written to the stream before saving the image, the image data in the stream will be corrupted.

Source:

Image.cs

Source:

Image.cs

public:
 void Save(System::String ^ filename);

public void Save (string filename);

member this.Save : string -> unit

Public Sub Save (filename As String)

Parameters

Exceptions

Examples

The following code example demonstrates how to call the Save method. This example is designed to be used with Windows Forms. Create a form that contains a button named Button5. Paste the code into the form, and associate the method with the button's Click event.

private:
   void Button5_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
   {
      try
      {
         if ( image1 != nullptr )
         {
            image1->Save( "c:\\myBitmap.bmp" );
            Button5->Text = "Saved file.";
         }
      }
      catch ( Exception^ ) 
      {
         MessageBox::Show( "There was a problem saving the file."
         "Check the file permissions." );
      }
   }

private void Button5_Click(System.Object sender, System.EventArgs e)
{
    try
    {
        if (image1 != null)
        {
            image1.Save("c:\\myBitmap.bmp");
            Button5.Text = "Saved file.";
        }
    }
    catch(Exception)
    {
        MessageBox.Show("There was a problem saving the file." +
            "Check the file permissions.");
    }
}

Private Sub Button5_Click(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) Handles Button5.Click
    Try
        If (image1 IsNot Nothing) Then
            image1.Save("c:\myBitmap.bmp")
            Button5.Text = "Saved file."
        End If
    Catch ex As Exception
        MessageBox.Show("There was a problem saving the file." _
        & "Check the file permissions.")
    End Try

End Sub

Remarks

If no encoder exists for the file format of the image, the Portable Network Graphics (PNG) encoder is used. When you use the Save method to save a graphic image as a Windows Metafile Format (WMF) or Enhanced Metafile Format (EMF) file, the resulting file is saved as a Portable Network Graphics (PNG) file. This behavior occurs because the GDI+ component of the .NET Framework does not have an encoder that you can use to save files as .wmf or .emf files.

Saving the image to the same file it was constructed from is not allowed and throws an exception.