ObjectDataSource.DeleteParameters Propriété
Définition
Important
Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.
Obtient la collection de paramètres qui contient les paramètres utilisés par la méthode DeleteMethod.
public:
property System::Web::UI::WebControls::ParameterCollection ^ DeleteParameters { System::Web::UI::WebControls::ParameterCollection ^ get(); };[System.Web.UI.PersistenceMode(System.Web.UI.PersistenceMode.InnerProperty)]
public System.Web.UI.WebControls.ParameterCollection DeleteParameters { get; }[<System.Web.UI.PersistenceMode(System.Web.UI.PersistenceMode.InnerProperty)>]
member this.DeleteParameters : System.Web.UI.WebControls.ParameterCollectionPublic ReadOnly Property DeleteParameters As ParameterCollectionValeur de propriété
ParameterCollection qui contient les paramètres utilisés par la méthode DeleteMethod.
- Attributs
Exemples
Cette section contient deux exemples de code. Le premier exemple de code montre comment utiliser un ObjectDataSource objet avec un objet métier et un GridView contrôle pour supprimer des données. Le deuxième exemple de code montre la EmployeeLogic classe utilisée dans le premier exemple de code.
L’exemple de code suivant montre comment utiliser la DeleteParameters propriété du ObjectDataSource contrôle avec un objet métier et un GridView contrôle pour supprimer des données. Initialement, le GridView contrôle affiche un ensemble de tous les employés, à l’aide de la méthode spécifiée par la SelectMethod propriété pour récupérer les données de l’objet EmployeeLogic . Étant donné que la AutoGenerateDeleteButton propriété est définie sur true, le GridView contrôle affiche automatiquement un bouton Supprimer .
Si vous cliquez sur le bouton Supprimer , l’événement Deleting est appelé avec deux paramètres. Un paramètre, EmpID, provient du DataGrid contrôle et est basé sur la DataKeyNames propriété . L’autre paramètre provient de la propriété déclarative DeleteParameters . La EmployeeLogic classe surcharge la DeleteEmployee méthode . Une surcharge prend un NorthwindEmployee paramètre, et l’autre un Int32 paramètre nommé anID. Dans ce Deleting cas, les entrées de la InputParameters propriété sont ajustées pour inclure un seul paramètre nommé anID avec la valeur de original_EmpID. Lorsque le gestionnaire d’événements existe, la méthode correspondante DeleteEmployee est appelée.
L’exemple de code suivant montre la page Web qui affiche le DataGrid contrôle et gère l’événement Deleting .
<%@ Register TagPrefix="aspSample" Namespace="Samples.AspNet.CS" Assembly="Samples.AspNet.CS" %>
<%@ Import namespace="Samples.AspNet.CS" %>
<%@ Page language="c#" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
private void NorthwindEmployeeDeleting(object source, ObjectDataSourceMethodEventArgs e)
{
IDictionary paramsFromPage = e.InputParameters;
paramsFromPage.Remove("anID");
paramsFromPage.Add("anID", (int)paramsFromPage["EmpID"]);
paramsFromPage.Remove("EmpID");
}
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>ObjectDataSource - C# Example</title>
</head>
<body>
<form id="Form1" method="post" runat="server">
<asp:gridview
id="GridView1"
runat="server"
datasourceid="ObjectDataSource1"
autogeneratedeletebutton="true"
DataKeyNames="EmpID">
</asp:gridview>
<asp:objectdatasource
id="ObjectDataSource1"
runat="server"
selectmethod="GetAllEmployees"
deletemethod="DeleteEmployee"
OnDeleting="NorthwindEmployeeDeleting"
typename="Samples.AspNet.CS.EmployeeLogic">
<deleteparameters>
<asp:parameter name="anID" type="Int32" />
</deleteparameters>
</asp:objectdatasource>
</form>
</body>
</html>
<%@ Register TagPrefix="aspSample" Namespace="Samples.AspNet.VB" Assembly="Samples.AspNet.VB" %>
<%@ Import namespace="Samples.AspNet.VB" %>
<%@ Page language="vb" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
Private Sub NorthwindEmployeeDeleting(source As Object, e As ObjectDataSourceMethodEventArgs)
Dim paramsFromPage As IDictionary = e.InputParameters
paramsFromPage.Remove("anID")
paramsFromPage.Add("anID", CInt(paramsFromPage("EmpID")))
paramsFromPage.Remove("EmpID")
End Sub ' NorthwindEmployeeDeleting
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>ObjectDataSource - VB Example</title>
</head>
<body>
<form id="Form1" method="post" runat="server">
<asp:gridview
id="GridView1"
runat="server"
datasourceid="ObjectDataSource1"
autogeneratedeletebutton="true"
DataKeyNames="EmpID">
</asp:gridview>
<asp:objectdatasource
id="ObjectDataSource1"
runat="server"
selectmethod="GetAllEmployees"
deletemethod="DeleteEmployee"
OnDeleting="NorthwindEmployeeDeleting"
typename="Samples.AspNet.VB.EmployeeLogic">
<deleteparameters>
<asp:parameter name="anID" type="Int32" />
</deleteparameters>
</asp:objectdatasource>
</form>
</body>
</html>
L’exemple de code suivant montre la EmployeeLogic classe utilisée dans l’exemple de code précédent.
namespace Samples.AspNet.CS {
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Data.SqlClient;
using System.Web.UI;
using System.Web.UI.WebControls;
//
// EmployeeLogic is a stateless business object that encapsulates
// the operations you can perform on a NorthwindEmployee object.
//
public class EmployeeLogic {
// Returns a collection of NorthwindEmployee objects.
public static ICollection GetAllEmployees () {
ArrayList al = new ArrayList();
// Use the SqlDataSource class to wrap the
// ADO.NET code required to query the database.
ConnectionStringSettings cts = ConfigurationManager.ConnectionStrings["NorthwindConnection"];
SqlDataSource sds
= new SqlDataSource(cts.ConnectionString,
"SELECT EmployeeID FROM Employees");
try {
IEnumerable IDs = sds.Select(DataSourceSelectArguments.Empty);
// Iterate through the Enumeration and create a
// NorthwindEmployee object for each ID.
IEnumerator enumerator = IDs.GetEnumerator();
while (enumerator.MoveNext()) {
// The IEnumerable contains DataRowView objects.
DataRowView row = enumerator.Current as DataRowView;
int id = (int) row["EmployeeID"];
NorthwindEmployee nwe = new NorthwindEmployee(id);
// Add the NorthwindEmployee object to the collection.
al.Add(nwe);
}
}
finally {
// If anything strange happens, clean up.
sds.Dispose();
}
return al;
}
public static NorthwindEmployee GetEmployee(int anID) {
return new NorthwindEmployee(anID);
}
public static void DeleteEmployee(NorthwindEmployee ne) {
bool retval = ne.Delete();
if (! retval) { throw new NorthwindDataException("Employee delete failed."); }
// Delete the object in memory.
ne = null;
}
public static void DeleteEmployee(int anID) {
NorthwindEmployee tempEmp = new NorthwindEmployee(anID);
DeleteEmployee(tempEmp);
}
}
public class NorthwindEmployee {
public NorthwindEmployee (int anID) {
this.ID = anID;
ConnectionStringSettings cts = ConfigurationManager.ConnectionStrings["NorthwindConnection"];
SqlConnection conn = new SqlConnection (cts.ConnectionString);
SqlCommand sc =
new SqlCommand(" SELECT FirstName,LastName " +
" FROM Employees " +
" WHERE EmployeeID = @empId",
conn);
// Add the employee ID parameter and set its value.
sc.Parameters.Add(new SqlParameter("@empId",SqlDbType.Int)).Value = Int32.Parse(anID.ToString());
SqlDataReader sdr = null;
try {
conn.Open();
sdr = sc.ExecuteReader();
// This is not a while loop. It only loops once.
if (sdr != null && sdr.Read()) {
// The IEnumerable contains DataRowView objects.
this.firstName = sdr["FirstName"].ToString();
this.lastName = sdr["LastName"].ToString();
}
else {
throw new NorthwindDataException("Data not loaded for employee id.");
}
}
finally {
try {
if (sdr != null) sdr.Close();
conn.Close();
}
catch (SqlException) {
// Log an event in the Application Event Log.
throw;
}
}
}
private object ID;
public object EmpID {
get { return ID; }
}
private string lastName;
public string LastName {
get { return lastName; }
set { lastName = value; }
}
private string firstName;
public string FirstName {
get { return firstName; }
set { firstName = value; }
}
public bool Delete () {
if (ID.Equals(DBNull.Value)) {
// The Employee object is not persisted.
return true;
}
else {
// The Employee object is persisted.
// Use the SqlDataSource control as a convenient wrapper for
// the ADO.NET code needed to delete a record from the database.
ConnectionStringSettings cts = ConfigurationManager.ConnectionStrings["NorthwindConnection"];
SqlDataSource sds = new SqlDataSource();
try {
sds.ConnectionString = cts.ConnectionString;
sds.DeleteCommand = "DELETE FROM Employees WHERE EmployeeID=@empID;";
sds.DeleteParameters.Add(new Parameter("empID",TypeCode.Int32,this.ID.ToString()));
/* To make this sample fully functional, uncomment these lines
int retval = sds.Delete();
if (retval == 1) { return true; }
return false; */
return true;
}
finally {
sds.Dispose();
}
}
}
}
internal class NorthwindDataException: Exception {
public NorthwindDataException(string msg) : base (msg) { }
}
}
Imports System.Collections
Imports System.Configuration
Imports System.Data
Imports System.Data.SqlClient
Imports System.Web.UI
Imports System.Web.UI.WebControls
Namespace Samples.AspNet.VB
'
' EmployeeLogic is a stateless business object that encapsulates
' the operations you can perform on a NorthwindEmployee object.
Public Class EmployeeLogic
' Returns a collection of NorthwindEmployee objects.
Public Shared Function GetAllEmployees() As ICollection
Dim al As New ArrayList()
' Use the SqlDataSource class to wrap the
' ADO.NET code required to query the database.
Dim cts As ConnectionStringSettings = ConfigurationManager.ConnectionStrings("NorthwindConnection")
Dim sds As New SqlDataSource(cts.ConnectionString, "SELECT EmployeeID FROM Employees")
Try
Dim IDs As IEnumerable = sds.Select(DataSourceSelectArguments.Empty)
' Iterate through the Enumeration and create a
' NorthwindEmployee object for each ID.
Dim enumerator As IEnumerator = IDs.GetEnumerator()
While enumerator.MoveNext()
' The IEnumerable contains DataRowView objects.
Dim row As DataRowView = CType(enumerator.Current,DataRowView)
Dim id As String = row("EmployeeID").ToString()
Dim nwe As New NorthwindEmployee(CInt(id))
' Add the NorthwindEmployee object to the collection.
al.Add(nwe)
End While
Finally
' If anything strange happens, clean up.
sds.Dispose()
End Try
Return al
End Function 'GetAllEmployees
Public Shared Function GetEmployee(anID As Integer) As NorthwindEmployee
Return New NorthwindEmployee(anID)
End Function 'GetEmployee
Public Shared Sub DeleteEmployee(ne As NorthwindEmployee)
Dim retval As Boolean = ne.Delete()
If Not retval Then
Throw New NorthwindDataException("Employee delete failed.")
End If ' Delete the object in memory.
ne = Nothing
End Sub
Public Shared Sub DeleteEmployee(anID As Integer)
Dim tempEmp As New NorthwindEmployee(anID)
DeleteEmployee(tempEmp)
End Sub
' And so on...
End Class
Public Class NorthwindEmployee
Public Sub New(anID As Integer)
Me.ID = anID
Dim cts As ConnectionStringSettings = ConfigurationManager.ConnectionStrings("NorthwindConnection")
Dim conn As New SqlConnection(cts.ConnectionString)
Dim sc As New SqlCommand(" SELECT FirstName,LastName " & _
" FROM Employees " & _
" WHERE EmployeeID = @empId", conn)
' Add the employee ID parameter and set its value.
sc.Parameters.Add(New SqlParameter("@empId", SqlDbType.Int)).Value = Int32.Parse(anID.ToString())
Dim sdr As SqlDataReader = Nothing
Try
conn.Open()
sdr = sc.ExecuteReader()
' This is not a while loop. It only loops once.
If Not (sdr Is Nothing) AndAlso sdr.Read() Then
' The IEnumerable contains DataRowView objects.
Me.firstName = sdr("FirstName").ToString()
Me.lastName = sdr("LastName").ToString()
Else
Throw New NorthwindDataException("Data not loaded for employee id.")
End If
Finally
Try
If Not (sdr Is Nothing) Then
sdr.Close()
End If
conn.Close()
Catch se As SqlException
' Log an event in the Application Event Log.
Throw
End Try
End Try
End Sub
Private ID As Object
Public ReadOnly Property EmpID() As Object
Get
Return ID
End Get
End Property
Private aLastName As String
Public Property LastName() As String
Get
Return aLastName
End Get
Set
aLastName = value
End Set
End Property
Private aFirstName As String
Public Property FirstName() As String
Get
Return aFirstName
End Get
Set
aFirstName = value
End Set
End Property
Public Function Delete() As Boolean
If ID.Equals(DBNull.Value) Then
' The Employee object is not persisted.
Return True
Else
' The Employee object is persisted.
' Use the SqlDataSource control as a convenient wrapper for
' the ADO.NET code needed to delete a record from the database.
Dim cts As ConnectionStringSettings = ConfigurationManager.ConnectionStrings("NorthwindConnection")
Dim sds As New SqlDataSource()
Try
sds.ConnectionString = cts.ConnectionString
sds.DeleteCommand = "DELETE FROM Employees WHERE EmployeeID=@empID;"
Dim param As New Parameter("empID", TypeCode.Int32, CStr(Me.ID))
sds.DeleteParameters.Add(param)
' To make this sample fully functional, uncomment these lines
' int retval = sds.Delete();
' if (retval == 1) { return true; }
' return false;
Return True
Finally
sds.Dispose()
End Try
End If
End Function 'Delete
End Class
Friend Class NorthwindDataException
Inherits Exception
Public Sub New(msg As String)
MyBase.New(msg)
End Sub
End Class
End Namespace
Remarques
Les noms et les types des paramètres contenus dans la DeleteParameters collection doivent correspondre aux noms et aux types des paramètres dans la signature de méthode DeleteMethod . Les noms de paramètres sont affectés par la OldValuesParameterFormatString propriété et respectent la casse. Les paramètres de la collection dépendent des données qui se trouvent dans le contrôle lié aux données, des paramètres spécifiés de manière déclarative et des paramètres ajoutés par programmation. Pour plus d’informations, consultez « Fusion de paramètres » dans Delete et Utilisation de paramètres avec le contrôle ObjectDataSource.
La DeleteParameters propriété récupère la DeleteParameters propriété contenue par l’objet ObjectDataSourceView associé au ObjectDataSource contrôle .
Pour plus d’informations sur la fusion de paramètres, la durée de vie des objets et la résolution de méthode, consultez DeleteMethod.
