Rect.Size Propriété
Définition
Important
Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.
Obtient ou définit la largeur et la hauteur du rectangle.
public:
property System::Windows::Size Size { System::Windows::Size get(); void set(System::Windows::Size value); };public System.Windows.Size Size { get; set; }member this.Size : System.Windows.Size with get, setPublic Property Size As SizeValeur de propriété
Une structure Size qui spécifie la hauteur et la largeur du rectangle.
Exceptions
Exemples
L’exemple suivant montre comment utiliser une Rect structure pour spécifier les dimensions et l’emplacement d’un rectangle à l’aide de XAML.
using System;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Media;
using System.Windows.Shapes;
namespace SDKSample
{
public partial class RectExample : Page
{
public RectExample()
{
Path myPath1 = new Path();
myPath1.Stroke = Brushes.Black;
myPath1.StrokeThickness = 1;
SolidColorBrush mySolidColorBrush = new SolidColorBrush();
mySolidColorBrush.Color = Color.FromArgb(255, 204, 204, 255);
myPath1.Fill = mySolidColorBrush;
// Create the rectangle.
// This RectangleGeometry specifies a rectangle that is 100 pixels high and
// 150 wide. The left side of the rectangle is 10 pixels from the left of the
// Canvas and the top side of the rectangle is 100 pixels from the top of the Canvas.
// Note: You could alternatively use the Rect Constructor to create this:
// Rect my Rect1 = new Rect(10,100,150,100");
Rect myRect1 = new Rect();
myRect1.X = 10;
myRect1.Y = 100;
myRect1.Width = 150;
myRect1.Height = 100;
RectangleGeometry myRectangleGeometry1 = new RectangleGeometry();
myRectangleGeometry1.Rect = myRect1;
GeometryGroup myGeometryGroup1 = new GeometryGroup();
myGeometryGroup1.Children.Add(myRectangleGeometry1);
myPath1.Data = myGeometryGroup1;
Path myPath2 = new Path();
myPath2.Stroke = Brushes.Black;
myPath2.StrokeThickness = 1;
myPath2.Fill = mySolidColorBrush;
// Create the rectangle.
// This Rect uses the Size property to specify a height of 50 and width
// of 200. The Location property uses a Point value to determine the location of the
// top-left corner of the rectangle.
Rect myRect2 = new Rect();
myRect2.Size = new Size(50, 200);
myRect2.Location = new Point(300, 100);
RectangleGeometry myRectangleGeometry2 = new RectangleGeometry();
myRectangleGeometry2.Rect = myRect2;
GeometryGroup myGeometryGroup2 = new GeometryGroup();
myGeometryGroup2.Children.Add(myRectangleGeometry2);
myPath2.Data = myGeometryGroup2;
// Add path shape to the UI.
Canvas myCanvas = new Canvas();
myCanvas.Children.Add(myPath1);
myCanvas.Children.Add(myPath2);
this.Content = myCanvas;
}
}
}
Imports System.Windows
Imports System.Windows.Controls
Imports System.Windows.Media
Imports System.Windows.Shapes
Namespace SDKSample
Partial Public Class RectExample
Inherits Page
Public Sub New()
Dim myPath1 As New Path()
myPath1.Stroke = Brushes.Black
myPath1.StrokeThickness = 1
Dim mySolidColorBrush As New SolidColorBrush()
mySolidColorBrush.Color = Color.FromArgb(255, 204, 204, 255)
myPath1.Fill = mySolidColorBrush
' Create the rectangle.
' This RectangleGeometry specifies a rectangle that is 100 pixels high and
' 150 wide. The left side of the rectangle is 10 pixels from the left of the
' Canvas and the top side of the rectangle is 100 pixels from the top of the Canvas.
' Note: You could alternatively use the Rect Constructor to create this:
' Dim myRect1 As New Rect(10,100,150,100")
Dim myRect1 As New Rect()
myRect1.X = 10
myRect1.Y = 100
myRect1.Width = 150
myRect1.Height = 100
Dim myRectangleGeometry1 As New RectangleGeometry()
myRectangleGeometry1.Rect = myRect1
Dim myGeometryGroup1 As New GeometryGroup()
myGeometryGroup1.Children.Add(myRectangleGeometry1)
myPath1.Data = myGeometryGroup1
Dim myPath2 As New Path()
myPath2.Stroke = Brushes.Black
myPath2.StrokeThickness = 1
myPath2.Fill = mySolidColorBrush
' Create the rectangle.
' This Rect uses the Size property to specify a height of 50 and width
' of 200. The Location property uses a Point value to determine the location of the
' top-left corner of the rectangle.
Dim myRect2 As New Rect()
myRect2.Size = New Size(50, 200)
myRect2.Location = New Point(300, 100)
Dim myRectangleGeometry2 As New RectangleGeometry()
myRectangleGeometry2.Rect = myRect2
Dim myGeometryGroup2 As New GeometryGroup()
myGeometryGroup2.Children.Add(myRectangleGeometry2)
myPath2.Data = myGeometryGroup2
' Add path shape to the UI.
Dim myCanvas As New Canvas()
myCanvas.Children.Add(myPath1)
myCanvas.Children.Add(myPath2)
Me.Content = myCanvas
End Sub
End Class
End Namespace
<Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<Canvas>
<!-- This rectangle demonstrates using the X, Y, Width, and Height properties
of a Rect object. -->
<Path Stroke="Black" StrokeThickness="1" Fill="LemonChiffon">
<Path.Data>
<!-- This RectangleGeometry specifies a rectangle that is 100 pixels high and
150 wide. The left side of the rectangle is 10 pixels from the left of the
Canvas and the top side of the rectangle is 100 pixels from the top of the Canvas.
Note: An abbreviated syntax for creating an equivalent rectangle is:
<RectangleGeometry Rect="10,100,150,100" /> -->
<RectangleGeometry>
<RectangleGeometry.Rect>
<Rect X="10" Y="100" Width="150" Height="100" />
</RectangleGeometry.Rect>
</RectangleGeometry>
</Path.Data>
</Path>
<!-- This rectangle demonstrates using the Size and Location properties of a Rect object. -->
<Path Stroke="Black" StrokeThickness="1" Fill="LemonChiffon">
<Path.Data>
<!-- This RectangleGeometry uses the Size property to specify a height of 50 and width
of 200. The Location property uses a Point value to determine the location of the
top-left corner of the rectangle. /> -->
<RectangleGeometry>
<RectangleGeometry.Rect>
<Rect Size="50,200" Location="300,100" />
</RectangleGeometry.Rect>
</RectangleGeometry>
</Path.Data>
</Path>
</Canvas>
</Page>
L’exemple suivant montre comment utiliser du code pour créer un rectangle et l’ajouter à la page. L’exemple montre également comment rechercher des informations de taille et de coordonnées sur le nouveau rectangle et afficher les informations dans un TextBox rectangle inférieur.
// Create a rectangle and add it to the page. Also,
// find size and coordinate information about this
// new rectangle and render information in a TextBox
// below the rectangle.
private StackPanel createRectExample1()
{
// Initialize new rectangle.
Rect myRectangle = new Rect();
// The Location property specifies the coordinates of the upper left-hand
// corner of the rectangle. Set the Location property to an X coordinate of 10 and a
// Y coordinate of 5.
myRectangle.Location = new Point(10, 5);
// Set the Size property of the rectangle with a width of 200
// and a height of 50.
myRectangle.Size = new Size(200, 50);
RectangleGeometry myRectangleGeometry = new RectangleGeometry();
myRectangleGeometry.Rect = myRectangle;
// This path is defined by the rectangle.
Path myPath = new Path();
myPath.Fill = Brushes.LemonChiffon;
myPath.Stroke = Brushes.Black;
myPath.StrokeThickness = 1;
myPath.Data = myRectangleGeometry;
//////////// Create string of rectangle property information /////////////
// This string will contain all the size and coordinate property
// information about the rectangle.
/////////////////////////////////////////////////////////////////////////
string rectInfo = "Rectangle Property Information: ";
// Bottom property gets the y-axis value of the bottom of the rectangle.
// For this rectangle the value is 55.
rectInfo = rectInfo + "Bottom: " + myRectangle.Bottom;
// BottomLeft property gets the coordinates of the bottom left corner of the rectangle.
// For this rectangle the value is 10,55.
rectInfo = rectInfo + "| BottomLeft: " + myRectangle.BottomLeft;
// BottomRight property gets the coordinates of the bottom right corner of the rectangle.
// For this rectangle the value is 210,55.
rectInfo = rectInfo + "| BottomRight: " + myRectangle.BottomRight;
// Height property gets or sets the height of the rectangle.
// For this rectangle the value is 50.
rectInfo = rectInfo + "| Height: " + myRectangle.Height;
// Width property gets or sets the width of the rectangle.
// For this rectangle the value is 200.
rectInfo = rectInfo + "| Width: " + myRectangle.Width;
// Left property gets the x-axis position of the left side of the rectangle which is
// equivalent to getting the rectangle's X property.
// For this rectangle the value is 10.
rectInfo = rectInfo + "| Left: " + myRectangle.Left;
// Location property gets or sets the position of the rectangle's top-left corner.
// For this rectangle the value is 10,5.
rectInfo = rectInfo + "| Location: " + myRectangle.Location;
// Right property gets the x-axis value of the right side of the rectangle.
// For this rectangle the value is 210.
rectInfo = rectInfo + "| Right: " + myRectangle.Right;
// Size property gets or sets the width and height of the rectangle.
// For this rectangle the value is 200,50.
rectInfo = rectInfo + "| Size: " + myRectangle.Size;
// Top property gets the y-axis position of the top of the rectangle which is
// equivalent to getting the rectangle's Y property.
// For this rectangle the value is 5.
rectInfo = rectInfo + "| Top: " + myRectangle.Top;
// TopLeft property gets the position of the top-left corner of the rectangle, which
// is equivalent to (X, Y).
// For this rectangle the value is 10,5.
rectInfo = rectInfo + "| TopLeft: " + myRectangle.TopLeft;
// TopRight property gets the position of the top-left corner of the rectangle, which
// is equivalent to (X + Width, Y).
// For this rectangle the value is 210,5.
rectInfo = rectInfo + "| TopRight: " + myRectangle.TopRight;
// X property gets or sets the location of the rectangle's left side.
// For this rectangle the value is 10.
rectInfo = rectInfo + "| X: " + myRectangle.X;
// Y property gets or sets the location of the rectangle's top side.
// For this rectangle the value is 5.
rectInfo = rectInfo + "| Y: " + myRectangle.Y;
//////// End of creating string containing rectangle property information ////////
// This StackPanel will contain the rectangle and TextBlock.
StackPanel parentPanel = new StackPanel();
// Add the rectangle path to the StackPanel. This will display the rectangle.
parentPanel.Children.Add(myPath);
// Add a TextBlock to display the rectangle's size and coordinate information.
TextBlock myTextBlock = new TextBlock();
myTextBlock.Text = rectInfo;
parentPanel.Children.Add(myTextBlock);
// Return the parent container to be displayed to the screen.
return parentPanel;
}